Precautions:
1. We strongly recommend to use Primary Antibody Diluent, eventually alternative diluent (containing protease free BSA at the concentrations >1mg/ml) for dilution of concentrated antibodies, otherwise the warranty might be voided.
2. Centrifuge the vial before use.
3. Intended for professional test in laboratories.
4. Do not use after expiration date stamped on vial label.
5. Avoid contamination of the reagent.
6. Any discrepancies in the recommended procedures stated in the working protocol may affect the final results.
7. The reagent contains sodium azide (NaN3) which is highly toxic in higher concentrations. The concentration in the reagent (0.05%) is not considered as hazardous.
8. Disposal of waste material must be conducted in accordance with local regulations.
9. Wear appropriate Personal Protective Equipment to avoid contact with eyes and skin.
Instruction Manual
2. Wash the section in 96%, 80% and 70% ethyl alcohol for 10 minutes each.
3. Rinse in distilled water.
4. Block the endogenous peroxidase by incubating the tissue in 3% hydrogen peroxide (H2O2) for 10 minutes.
5. Wash in distilled water.
6. For antigen retrieval: immerse the slide in Tris-EDTA buffer, pH 9.0, 0.05% Tween- 20*, and incubate in water bath at 96-98ºC for 20-25 minutes. (Alternatively adjust to your own protocol, keeping the required pH)
7. Transfer the slide to room temperature and let it cool down (in Tris-EDTA buffer, pH 9.0) for 15 minutes.
8. Rinse in distilled water.
9. Wash in 0.05 M Tris-HCl, pH 7.6 buffer supplemented with 0.2% of Tween-20 (buffer A) for 5 minutes.
10. CONCENTRATED:
Incubate the section with primary antibody at the dilution 1:100 - 1:200 for 1 hour in the closed wet chamber.
READY TO USE (RTU):
Incubate the section with primary antibody (ready to use) for 1 hour in a closed wet chamber.
11. Wash twice 5 minutes with buffer A.
12. Apply the secondary antibody (the protocol depends on the supplier), and proceed to standard immunohistochemistry protocol (HRP - Peroxide - DAB). Micropolymer-HRP detection kit rabbit/mouse dual is suggested.
13. Wash twice 5 minutes with buffer A.
14. Apply the chromogen (DAB), 1 - 3 minutes.
15. Wash in water – 10 minutes.
16. Stain in hematoxylin for 5 minutes.
17. Wash in water – 10 minutes.
18. Dehydrate the section in 2 changes of 96% ethyl alcohol for 5 minutes each.
19. Wash the section in 2 changes of xylene for 2 minutes each.
20. Mount the slide for observation.
*Tris-EDTA Buffer (10mM Tris Base, 1mM EDTA solution, 0.05% Tween-20, pH 9.0):
Tris ------------- 1.21 g; EDTA ------------ 0.37 g; Distilled water ----------- 1000 ml Mix to dissolve in 700 ml of distilled water. Adjust pH to 9.0 with 1M HCl and then add 0.5 ml of Tween-20 and mix well. Adjust the final volume to 1 liter with distilled water.
Immunohistochemistry (IHC)
(AHigh Grade SIL (squamous intraepithelial lesion) of the uterine cervix showing full-thickness Ki-67 immunoexpression in the dysplastic epithelium (A), B-cell lymphoma showing high proliferating index visualised by the Ki-67 immunohistochemistry (B) and proliferating germinal centre cells of the lymphoid follicle visualised by the Ki-67 immunohistochemistry (C). All, formalin fixed, paraffin embedded human tissues (4 um sections) stained with anti - Ki-67 (MBS684060) monospecific clonal antibody according to related datasheet.)
Immunohistochemistry (IHC)
(BHigh Grade SIL (squamous intraepithelial lesion) of the uterine cervix showing full-thickness Ki-67 immunoexpression in the dysplastic epithelium (A), B-cell lymphoma showing high proliferating index visualised by the Ki-67 immunohistochemistry (B) and proliferating germinal centre cells of the lymphoid follicle visualised by the Ki-67 immunohistochemistry (C). All, formalin fixed, paraffin embedded human tissues (4um sections) stained with anti - Ki-67 (MBS684060) monospecific clonal antibody according to related datasheet.)
Immunohistochemistry (IHC)
(CHigh Grade SIL (squamous intraepithelial lesion) of the uterine cervix showing full-thickness Ki-67 immunoexpression in the dysplastic epithelium (A), B-cell lymphoma showing high proliferating index visualised by the Ki-67 immunohistochemistry (B) and proliferating germinal centre cells of the lymphoid follicle visualised by the Ki-67 immunohistochemistry (C). All, formalin fixed, paraffin embedded human tissues (4 um sections) stained with anti - Ki-67 (MBS684060) monospecific clonal antibody according to related datasheet.)
NCBI and Uniprot Product Information
NCBI Description
This gene encodes a nuclear protein that is associated with and may be necessary for cellular proliferation. Alternatively spliced transcript variants have been described. A related pseudogene exists on chromosome X. [provided by RefSeq, Mar 2009]
Uniprot Description
Function: Thought to be required for maintaining cell proliferation.
Subunit structure: Interacts with KIF15. Binds through the FHA domain to NIFK. Part of a complex composed at least of ASCL2, C11orf30/EMSY, HCFC1, HSPA8, CCAR2, MATR3, MKI67, RBBP5, TUBB2A, WDR5 and ZNF335; this complex may have a histone H3-specific methyltransferase activity. Ref.4 Ref.5 Ref.13 Ref.19
Subcellular location: Nucleus. Nucleus › nucleolus. Chromosome. Note: Predominantly localized in the G1 phase in the perinucleolar region, in the later phases it is also detected throughout the nuclear interior, being predominantly localized in the nuclear matrix. In mitosis, it is present on all chromosomes. Ref.20
Developmental stage: Expression of this antigen occurs preferentially during late G1, S, G2 and M phases of the cell cycle, while in cells in G0 phase the antigen cannot be detected.
Sequence similarities: Contains 1 FHA domain.
Research Articles on Ki-67
Similar Products
Product Notes
The Ki-67 mki67 (Catalog #AAA684060) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti - Ki-67 reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's Ki-67 can be used in a range of immunoassay formats including, but not limited to, Immunohistochemistry (IHC) - Formalin/Paraffin. IHC-P dilution 1:100 - 1:200; IHC-Fr application and dilution to be tested by the user. Precautions: 1. We strongly recommend to use Primary Antibody Diluent, eventually alternative diluent (containing protease free BSA at the concentrations >1mg/ml) for dilution of concentrated antibodies, otherwise the warranty might be voided. 2. Centrifuge the vial before use. 3. Intended for professional test in laboratories. 4. Do not use after expiration date stamped on vial label. 5. Avoid contamination of the reagent. 6. Any discrepancies in the recommended procedures stated in the working protocol may affect the final results. 7. The reagent contains sodium azide (NaN3) which is highly toxic in higher concentrations. The concentration in the reagent (0.05%) is not considered as hazardous. 8. Disposal of waste material must be conducted in accordance with local regulations. 9. Wear appropriate Personal Protective Equipment to avoid contact with eyes and skin. Researchers should empirically determine the suitability of the Ki-67 mki67 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "Ki-67, Monoclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.