Western Blot (WB)
(Figure 1. Western blot analysis of Integrin alpha V/ITGAV using anti-Integrin alpha V/ITGAV antibody (MBS1753440).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human A549 whole cell lysatesLane 2: human A431 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Integrin alpha V/ITGAV antigen affinity purified polyclonal antibody (Catalog # MBS1753440) at 0. 25 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for Integrin alpha V/ITGAV at approximately 130-140KD. The expected band size for Integrin alpha V/ITGAV is at 130KD. )
Rabbit anti-Human Integrin alpha V/ITGAV Polyclonal Antibody | anti-ITGAV antibody
Anti-Integrin alpha V/ITGAV Antibody
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of Integrin alpha V/ITGAV using anti-Integrin alpha V/ITGAV antibody (MBS1753440).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human A549 whole cell lysatesLane 2: human A431 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Integrin alpha V/ITGAV antigen affinity purified polyclonal antibody (Catalog # MBS1753440) at 0. 25 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for Integrin alpha V/ITGAV at approximately 130-140KD. The expected band size for Integrin alpha V/ITGAV is at 130KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of Integrin alpha V/ITGAV using anti-Integrin alpha V/ITGAV antibody (MBS1753440).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human A549 whole cell lysatesLane 2: human A431 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-Integrin alpha V/ITGAV antigen affinity purified polyclonal antibody (Catalog # MBS1753440) at 0. 25 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for Integrin alpha V/ITGAV at approximately 130-140KD. The expected band size for Integrin alpha V/ITGAV is at 130KD. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of Raji cells using anti-Integrin alpha V/ITGAV antibody (MBS1753440).Overlay histogram showing Raji cells stained with MBS1753440 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Integrin alpha V/ITGAV Antibody (MBS1753440,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of Raji cells using anti-Integrin alpha V/ITGAV antibody (MBS1753440).Overlay histogram showing Raji cells stained with MBS1753440 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-Integrin alpha V/ITGAV Antibody (MBS1753440,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Fernandez-Ruiz, E., de Villena, F. P. -M., Rodriguez de Cordoba, S., Sanchez-Madrid, F. Regional localization of the human vitronectin receptor alpha-subunit gene (VNRA) to chromosome 2q31-q32. Cytogenet. Cell Genet. 62: 26-28, 1993.
NCBI and Uniprot Product Information
NCBI Description
This gene encodes a protein that is a member of the integrin superfamily. Integrins are heterodimeric integral membrane proteins composed of an alpha chain and a beta chain. This protein undergoes post-translational cleavage to yield disulfide-linked heavy and light chains that combine with multiple integrin beta chains to form different integrins. This protein has been shown to heterodimerize with beta 1, beta 3, beta 5, beta 6, and beta 8; the heterodimer of alpha v and beta 3 is the Vitronectin receptor. This protein interacts with several extracellular matrix proteins to mediate cell adhesion and may play a role in cell migration. It is proposed that this protein may regulate angiogenesis and cancer progression. Alternative splicing results in multiple transcript variants that encode different protein isoforms. [provided by RefSeq, May 2013]
Uniprot Description
ITGAV: The alpha-V integrins are receptors for vitronectin, cytotactin, fibronectin, fibrinogen, laminin, matrix metalloproteinase-2, osteopontin, osteomodulin, prothrombin, thrombospondin and vWF. They recognize the sequence R-G-D in a wide array of ligands. In case of HIV-1 infection, the interaction with extracellular viral Tat protein seems to enhance angiogenesis in Kaposi's sarcoma lesions. Belongs to the integrin alpha chain family. 2 isoforms of the human protein are produced by alternative splicing.
Protein type: Cell adhesion; Membrane protein, integral; Motility/polarity/chemotaxis
Chromosomal Location of Human Ortholog: 2q31-q32
Cellular Component: filopodium membrane; focal adhesion; cell surface; membrane; integral to plasma membrane; microvillus membrane; plasma membrane; phagocytic vesicle; integrin complex; external side of plasma membrane
Molecular Function: voltage-gated calcium channel activity; viral receptor activity; protein binding; opsonin binding; insulin-like growth factor I binding; protein kinase C binding; protease binding; extracellular matrix binding; transforming growth factor beta binding; metal ion binding; fibronectin binding
Biological Process: negative regulation of lipid transport; axon guidance; entry of virus into host cell; extracellular matrix organization and biogenesis; positive regulation of cell adhesion; cell-matrix adhesion; negative chemotaxis; entry of symbiont into host cell by promotion of host phagocytosis; regulation of phagocytosis; antigen processing and presentation of peptide antigen via MHC class I; positive regulation of cell proliferation; antigen processing and presentation of exogenous peptide antigen via MHC class I; angiogenesis; cell adhesion; cell growth; integrin-mediated signaling pathway; cell migration; negative regulation of lipoprotein metabolic process; antigen processing and presentation of exogenous peptide antigen via MHC class I, TAP-dependent; cell-substrate adhesion; heterotypic cell-cell adhesion; negative regulation of low-density lipoprotein receptor biosynthetic process; positive regulation of osteoblast proliferation; vascular endothelial growth factor receptor signaling pathway; blood coagulation; leukocyte migration; apoptotic cell clearance; positive regulation of cell migration
Research Articles on ITGAV
Similar Products
Product Notes
The ITGAV itgav (Catalog #AAA1753440) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-Integrin alpha V/ITGAV Antibody reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's Integrin alpha V/ITGAV can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.1-0.25ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the ITGAV itgav for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "Integrin alpha V/ITGAV, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
