Loading...

Skip to main content

Call us on + 1 (800) 604-9114 for more information about our products

Looking for specific datasheet Manual/COA/MSDS?
Request a Manual/COA/MSDS

Interested to get a quote about our products?
Request a Quote

Western Blot (WB) (Anti-CDK1/CDC2 rabbit polyclonal antibody at 1:500 dilution Lane A: HL60 Whole Cell Lysate Lane B: Hela Whole Cell Lysate Lane C: 293T Whole Cell Lysate Lane D: THP1 Whole Cell Lysate Lysates/proteins at 30 ug per lane. Secondary Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution. Developed using the ECL technique. Performed under reducing conditions. Predicted band size:34 kDa Observed band size:34 kDa (We are unsure as to the identity of these extra bands.))

Rabbit anti-Human CDK1 Polyclonal Antibody | anti-CDK1 antibody

Anti-CDK1 Antibody, Rabbit Polyclonal

Reactivity
Human
Applications
Western Blot, Immunoprecipitation
Purity
Protein A & Antigen Affinity
Synonyms
CDK1; Polyclonal Antibody; Anti-CDK1 Antibody; Rabbit Polyclonal; CDK1 Antibody; Rabbit PAb; Antigen Affinity Purified; Anti-CDC2 Antibody; Anti-CDC28A Antibody; Anti-P34CDC2 Antibody; cyclin-dependent kinase 1; anti-CDK1 antibody
Ordering
For Research Use Only!
Host
Rabbit
Reactivity
Human
Clonality
Polyclonal
Isotype
Rabbit IgG
Specificity
Human CDK1
Purity/Purification
Protein A & Antigen Affinity
Form/Format
Liquid. PBS, pH7.0 with 0.03% Proclin300
Applicable Applications for anti-CDK1 antibody
Western Blot (WB), Immunoprecipitation (IP)
Application Notes
WB: 1:500-1:2000
IP: 1-5uL/mg of Lysate
Immunogen
E Coli-derived Human CDK1 fragment
Conjugation
Unconjugated
Preparation
Produced in rabbits immunized with E Coli-derived Human CDK1 fragment, and purified by antigen affinity chromatography.
Preparation and Storage
This antibody can be stored at 2-8 degree C for one month without detectable loss of activity. Antibody products are stable for twelve months from date of receipt when stored at -20 degree C to -80 degree C. Avoid repeated freeze-thaw cycles.
This antibody is shipped as liquid solution at ambient temperature. Upon receipt, store it immediately at the temperature recommended below.

Western Blot (WB)

(Anti-CDK1/CDC2 rabbit polyclonal antibody at 1:500 dilution Lane A: HL60 Whole Cell Lysate Lane B: Hela Whole Cell Lysate Lane C: 293T Whole Cell Lysate Lane D: THP1 Whole Cell Lysate Lysates/proteins at 30 ug per lane. Secondary Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution. Developed using the ECL technique. Performed under reducing conditions. Predicted band size:34 kDa Observed band size:34 kDa (We are unsure as to the identity of these extra bands.))

Western Blot (WB) (Anti-CDK1/CDC2 rabbit polyclonal antibody at 1:500 dilution Lane A: HL60 Whole Cell Lysate Lane B: Hela Whole Cell Lysate Lane C: 293T Whole Cell Lysate Lane D: THP1 Whole Cell Lysate Lysates/proteins at 30 ug per lane. Secondary Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution. Developed using the ECL technique. Performed under reducing conditions. Predicted band size:34 kDa Observed band size:34 kDa (We are unsure as to the identity of these extra bands.))

Immunoprecipitation (IP)

(CDC2 was immunoprecipitated using: Lane A:0.5 mg THP1 Whole Cell Lysate 4 uL anti-CDC2 rabbit polyclonal antibody and 60 ug of Immunomagnetic beads Protein A/G. Primary antibody: Anti-CDC2 rabbit polyclonal antibody,at 1:100 dilution Secondary antibody: Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution Developed using the ECL technique. Performed under reducing conditions. Predicted band size: 34 kDa Observed band size :34 kDa)

Immunoprecipitation (IP) (CDC2 was immunoprecipitated using: Lane A:0.5 mg THP1 Whole Cell Lysate 4 uL anti-CDC2 rabbit polyclonal antibody and 60 ug of Immunomagnetic beads Protein A/G. Primary antibody: Anti-CDC2 rabbit polyclonal antibody,at 1:100 dilution Secondary antibody: Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution Developed using the ECL technique. Performed under reducing conditions. Predicted band size: 34 kDa Observed band size :34 kDa)
Related Product Information for anti-CDK1 antibody
Background: CDC2, also known as CDK1, contains 1 protein kinase domain and belongs to the protein kinase superfamily, CMGC Ser/Thr protein kinase family, CDC2/CDKX subfamily. CDC2 is a catalytic subunit of the highly conserved protein kinase complex known as M-phase promoting factor (MPF), which is essential for G1/S and G2/M phase transitions of eukaryotic cell cycle. Mitotic cyclins stably associate with CDC2 and function as regulatory subunits. The kinase activity of CDK1 is controlled by cyclin accumulation and destruction through the cell cycle. The phosphorylation and dephosphorylation of CDC2 also play important regulatory roles in cell cycle control. It is required in higher cells for entry into S-phase and mitosis. CDC2 also is a cyclin-dependent kinase which displays CTD kinase activity and is required for RNA splicing. It has CTD kinase activity by hyperphosphorylating the C-terminal heptapeptide repeat domain (CTD) of the largest RNA polymerase II subunit RPB1, thereby acting as a key regulator of transcription elongation. CDK1 is required for RNA splicing, possibly by phosphorylating SRSF1/SF2. It is involved in regulation of MAP kinase activity, possibly leading to affect the response to estrogn inhibitors.
References
Lee MG, et al. (1987) Complementation used to clone a human homologue of the fission yeast cell cycle control gene cdc2. Nature. 327(6117):31-5.Enserink JM, et al. (2010) An overview of Cdk1-controlled targets and processes. Cell Division. 5(11): 1-41.Ninomiya-Tsuji J, et al. (1991) Cloning of a human cDNA encoding a CDC2-related kinase by complementation of a budding yeast cdc28 mutation. Proc Natl Acad Sci. 88(20):9006-10.Zhan Q, et al. (1999) Association with Cdc2 and inhibition of Cdc2/Cyclin B1 kinase activity by the p53-regulated protein Gadd45. Oncogene. 18(18):2892-900.Jin S, et al. (2000) The GADD45 inhibition of Cdc2 kinase correlates with GADD45-mediated growth suppression. J Biol Chem. 275(22):16602-8.

Similar Products

Product Notes

The CDK1 (Catalog #AAA8119275) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-CDK1 Antibody, Rabbit Polyclonal reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's CDK1 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunoprecipitation (IP). WB: 1:500-1:2000 IP: 1-5uL/mg of Lysate. Researchers should empirically determine the suitability of the CDK1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "CDK1, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Looking for a specific manual?
Request a Manual

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.