Western Blot (WB)
(Figure 1. Western blot analysis of B MyB/MYBL2 using anti-B MyB/MYBL2 antibody (MBS1753536).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human Raji whole cell lysatesLane 2: human HEK293 whole cell lysatesLane 3: human Caco-2 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-B MyB/MYBL2 antigen affinity purified polyclonal antibody (Catalog # MBS1753536) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for B MyB/MYBL2 at approximately 100KD. The expected band size for B MyB/MYBL2 is at 100KD. )
Rabbit anti-Human B MyB/MYBL2 Polyclonal Antibody | anti-MYBL2 antibody
Anti-B MyB/MYBL2 Antibody
ICC/IF: 5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of B MyB/MYBL2 using anti-B MyB/MYBL2 antibody (MBS1753536).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human Raji whole cell lysatesLane 2: human HEK293 whole cell lysatesLane 3: human Caco-2 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-B MyB/MYBL2 antigen affinity purified polyclonal antibody (Catalog # MBS1753536) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for B MyB/MYBL2 at approximately 100KD. The expected band size for B MyB/MYBL2 is at 100KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of B MyB/MYBL2 using anti-B MyB/MYBL2 antibody (MBS1753536).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human Raji whole cell lysatesLane 2: human HEK293 whole cell lysatesLane 3: human Caco-2 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-B MyB/MYBL2 antigen affinity purified polyclonal antibody (Catalog # MBS1753536) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for B MyB/MYBL2 at approximately 100KD. The expected band size for B MyB/MYBL2 is at 100KD. )
Immunofluorescence (IF)
(Figure 2. IF analysis of B MyB/MYBL2 using anti- B MyB/MYBL2 antibody (MBS1753536).B MyB/MYBL2 was detected in immunocytochemical section of CACO-2 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti- B MyB/MYBL2 Antibody (MBS1753536) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Immunofluorescence (IF)
(Figure 2. IF analysis of B MyB/MYBL2 using anti- B MyB/MYBL2 antibody (MBS1753536).B MyB/MYBL2 was detected in immunocytochemical section of CACO-2 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti- B MyB/MYBL2 Antibody (MBS1753536) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of U937 cells using anti-B MyB/MYBL2 antibody (MBS1753536).Overlay histogram showing U937 cells stained with MBS1753536 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-B MyB/MYBL2 Antibody (MBS1753536, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of U937 cells using anti-B MyB/MYBL2 antibody (MBS1753536).Overlay histogram showing U937 cells stained with MBS1753536 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-B MyB/MYBL2 Antibody (MBS1753536, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Noben-Trauth, K., Copeland, N. G., Gilbert, D. J., Jenkins, N. A., Sonoda, G., Testa, J. R., Klempnauer, K. -H. Mybl2 (Bmyb) maps to mouse chromosome 2 and human chromosome 20q13. 1. Genomics 35: 610-612, 1996.
3. Shepard, J. L., Amatruda, J. F., Stern, H. M., Subramanian, A., Finkelstein, D., Ziai, J., Finley, K. R., Pfaff, K. L., Hersey, C., Zhou, Y., Barut, B., Freedman, M., and 9 others. A zebrafish bmyb mutation causes genome instability and increased cancer susceptibility. Proc. Nat. Acad. Sci. 102: 13194-13199, 2005.
NCBI and Uniprot Product Information
NCBI Description
The protein encoded by this gene, a member of the MYB family of transcription factor genes, is a nuclear protein involved in cell cycle progression. The encoded protein is phosphorylated by cyclin A/cyclin-dependent kinase 2 during the S-phase of the cell cycle and possesses both activator and repressor activities. It has been shown to activate the cell division cycle 2, cyclin D1, and insulin-like growth factor-binding protein 5 genes. Transcript variants may exist for this gene, but their full-length natures have not been determined. [provided by RefSeq, Jul 2008]
Uniprot Description
B-Myb: a transcription factor involved in cell cycle progression. Phosphorylated by cyclin A/cyclin-dependent kinase 2 during the S-phase of the cell cycle and possesses both activator and repressor activities. It has been shown to activate the cell division cycle 2, cyclin D1, and insulin-like growth factor-binding protein 5 genes. Transcript variants may exist for this gene, but their full-length natures have not been determined.
Protein type: DNA-binding; Motility/polarity/chemotaxis; Transcription factor
Chromosomal Location of Human Ortholog: 20q13.1
Cellular Component: nucleoplasm
Molecular Function: protein binding; chromatin binding; transcription factor activity
Biological Process: transcription, DNA-dependent; regulation of cell cycle; positive regulation of transcription from RNA polymerase II promoter; mitotic cell cycle; G2/M transition of mitotic cell cycle
Research Articles on MYBL2
Similar Products
Product Notes
The MYBL2 mybl2 (Catalog #AAA1753536) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-B MyB/MYBL2 Antibody reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's B MyB/MYBL2 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunocytochemistry (ICC), Immunofluorescence (IF), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human| ICC/IF: 5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the MYBL2 mybl2 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "B MyB/MYBL2, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
