Western Blot (WB)
(Figure 1. Western blot analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human HL-60 whole cell lysatesLane 2: human THP-1 whole cell lysatesLane 3: rat brain tissue lysatesLane 4: rat heart tissue lysatesLane 5: mouse brain tissue lysatesLane 6: mouse kidney tissue lysatesLane 7: mouse heart tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-ALK-1/ACVRL1 antigen affinity purified polyclonal antibody (Catalog # MBS1753435) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for ALK-1/ACVRL1 at approximately 55KD. The expected band size for ALK-1/ACVRL1 is at 55KD. )
Rabbit ALK-1/ACVRL1 Polyclonal Antibody | anti-ACVRL1 antibody
Anti-ALK-1/ACVRL1 Antibody
; activin A receptor like type 1; anti-ACVRL1 antibody
IHC-P: 2-5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human HL-60 whole cell lysatesLane 2: human THP-1 whole cell lysatesLane 3: rat brain tissue lysatesLane 4: rat heart tissue lysatesLane 5: mouse brain tissue lysatesLane 6: mouse kidney tissue lysatesLane 7: mouse heart tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-ALK-1/ACVRL1 antigen affinity purified polyclonal antibody (Catalog # MBS1753435) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for ALK-1/ACVRL1 at approximately 55KD. The expected band size for ALK-1/ACVRL1 is at 55KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human HL-60 whole cell lysatesLane 2: human THP-1 whole cell lysatesLane 3: rat brain tissue lysatesLane 4: rat heart tissue lysatesLane 5: mouse brain tissue lysatesLane 6: mouse kidney tissue lysatesLane 7: mouse heart tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-ALK-1/ACVRL1 antigen affinity purified polyclonal antibody (Catalog # MBS1753435) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for ALK-1/ACVRL1 at approximately 55KD. The expected band size for ALK-1/ACVRL1 is at 55KD. )
Immunohistochemistry (IHC)
(Figure 2. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human breast cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 2. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human breast cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 3. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human gallbladder adenocarcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 3. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human gallbladder adenocarcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 4. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human liver cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 4. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human liver cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 5. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human ovarian serous adenocarcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 5. IHC analysis of ALK-1/ACVRL1 using anti-ALK-1/ACVRL1 antibody (MBS1753435).ALK-1/ACVRL1 was detected in paraffin-embedded section of human ovarian serous adenocarcinoma tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Flow Cytometry (FC/FACS)
(Figure 6. Flow Cytometry analysis of MCF-7 cells using anti-ALK-1/ACVRL1 antibody (MBS1753435).Overlay histogram showing MCF-7 cells stained with MBS1753435 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 6. Flow Cytometry analysis of MCF-7 cells using anti-ALK-1/ACVRL1 antibody (MBS1753435).Overlay histogram showing MCF-7 cells stained with MBS1753435 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ALK-1/ACVRL1 Antibody (MBS1753435, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Abdalla, S. A., Letarte, M. Hereditary haemorrhagic telangiectasia: current views on genetics and mechanisms of disease. J. Med. Genet. 43: 97-110, 2006.
3. Abdalla, S. A., Pece-Barbara, N., Vera, S., Tapia, E., Paez, E., Bernabeu, C., Letarte, M. Analysis of ALK-1 and endoglin in newborns from families with hereditary hemorrhagic telangiectasia type 2. Hum. Molec. Genet. 9: 1227-1237, 2000.
NCBI and Uniprot Product Information
NCBI Description
This gene encodes a type I cell-surface receptor for the TGF-beta superfamily of ligands. It shares with other type I receptors a high degree of similarity in serine-threonine kinase subdomains, a glycine- and serine-rich region (called the GS domain) preceding the kinase domain, and a short C-terminal tail. The encoded protein, sometimes termed ALK1, shares similar domain structures with other closely related ALK or activin receptor-like kinase proteins that form a subfamily of receptor serine/threonine kinases. Mutations in this gene are associated with hemorrhagic telangiectasia type 2, also known as Rendu-Osler-Weber syndrome 2. [provided by RefSeq, Jul 2008]
Uniprot Description
ALK1: a kinase of the STKR family. A type I cell-surface receptor for the TGF-beta superfamily of ligands including Activin A. Highly expressed in human placenta and lung. Deficiency causes hemorrhagic telangiectasia type 2 also known as Rendu-Osler-Weber syndrome 2.
Protein type: Membrane protein, integral; Kinase, protein; Protein kinase, Ser/Thr (receptor); EC 2.7.11.30; Protein kinase, TKL; TKL group; STKR family; Type1 subfamily
Chromosomal Location of Human Ortholog: 12q13.13
Cellular Component: cell surface; cell soma; integral to plasma membrane; dendrite
Molecular Function: transforming growth factor beta receptor activity; protein serine/threonine kinase activity; protein binding; activin receptor activity, type I; transforming growth factor beta binding; transforming growth factor beta receptor activity, type I; metal ion binding; activin binding; SMAD binding; protein kinase binding; ATP binding; transmembrane receptor protein serine/threonine kinase activity; receptor signaling protein serine/threonine kinase activity
Biological Process: blood circulation; protein heterooligomerization; positive regulation of transcription, DNA-dependent; activin receptor signaling pathway; negative regulation of cell adhesion; signal transduction; regulation of blood vessel endothelial cell migration; protein amino acid phosphorylation; BMP signaling pathway; negative regulation of cell proliferation; positive regulation of endothelial cell differentiation; regulation of transcription, DNA-dependent; negative regulation of endothelial cell differentiation; transforming growth factor beta receptor signaling pathway; regulation of blood pressure; lymphangiogenesis; angiogenesis; negative regulation of cell migration; positive regulation of BMP signaling pathway; regulation of DNA replication; regulation of endothelial cell proliferation; in utero embryonic development; negative regulation of focal adhesion formation; negative regulation of blood vessel endothelial cell migration; blood vessel maturation; blood vessel endothelial cell proliferation during sprouting angiogenesis; positive regulation of angiogenesis; positive regulation of chondrocyte differentiation; negative regulation of endothelial cell proliferation; blood vessel remodeling; positive regulation of transcription from RNA polymerase II promoter; positive regulation of endothelial cell proliferation; negative regulation of cell growth; wound healing, spreading of epidermal cells
Disease: Telangiectasia, Hereditary Hemorrhagic, Type 2
Research Articles on ACVRL1
Similar Products
Product Notes
The ACVRL1 acvrl1 (Catalog #AAA1753435) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-ALK-1/ACVRL1 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's ALK-1/ACVRL1 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunohistochemistry-Paraffin (IHC-P), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human, Mouse, Rat| IHC-P: 2-5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the ACVRL1 acvrl1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "ALK-1/ACVRL1, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
