Western Blot (WB)
(Figure 1. Western blot analysis of ZIC3 using anti-ZIC3 antibody (MBS1753637).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: rat brain tissue lysatesLane 2: mouse brain tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-ZIC3 antigen affinity purified polyclonal antibody (Catalog # MBS1753637) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for ZIC3 at approximately 56-60KD. The expected band size for ZIC3 is at 56-60KD. )
Rabbit ZIC3 Polyclonal Antibody | anti-ZIC3 antibody
Anti-ZIC3 Antibody
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of ZIC3 using anti-ZIC3 antibody (MBS1753637).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: rat brain tissue lysatesLane 2: mouse brain tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-ZIC3 antigen affinity purified polyclonal antibody (Catalog # MBS1753637) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for ZIC3 at approximately 56-60KD. The expected band size for ZIC3 is at 56-60KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of ZIC3 using anti-ZIC3 antibody (MBS1753637).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: rat brain tissue lysatesLane 2: mouse brain tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-ZIC3 antigen affinity purified polyclonal antibody (Catalog # MBS1753637) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for ZIC3 at approximately 56-60KD. The expected band size for ZIC3 is at 56-60KD. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of MCF-7 cells using anti-ZIC3 antibody (MBS1753637).Overlay histogram showing MCF-7 cells stained with MBS1753637 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ZIC3 Antibody (MBS1753637, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of MCF-7 cells using anti-ZIC3 antibody (MBS1753637).Overlay histogram showing MCF-7 cells stained with MBS1753637 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-ZIC3 Antibody (MBS1753637, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Bedard, J. E. J., Purnell, J. D., Ware, S. M. Nuclear import and export signals are essential for proper cellular trafficking and function of ZIC3. Hum. Molec. Genet. 16: 187-198, 2007.
3. Burdine, R. D., Schier, A. F. Conserved and divergent mechanisms in left-right axis formation. Genes Dev. 14: 763-776, 2000.
NCBI and Uniprot Product Information
NCBI Description
This gene encodes a member of the ZIC family of C2H2-type zinc finger proteins. This nuclear protein probably functions as a transcription factor in early stages of left-right body axis formation. Mutations in this gene cause X-linked visceral heterotaxy, which includes congenital heart disease and left-right axis defects in organs. [provided by RefSeq, Jul 2008]
Uniprot Description
ZIC3: Acts as transcriptional activator. Required in the earliest stages in both axial midline development and left-right (LR) asymmetry specification. Binds to the minimal GLI-consensus sequence 5'-GGGTGGTC-3'. Defects in ZIC3 are the cause of visceral heterotaxy X- linked type 1 (HTX1). A form of visceral heterotaxy, a complex disorder due to disruption of the normal left-right asymmetry of the thoracoabdominal organs. It results in an abnormal arrangement of visceral organs, and a wide variety of congenital defects. Clinical features of visceral heterotaxy X- linked type 1 include dextrocardia, corrected transposition of great arteries, ventricular septal defect, patent ductus arteriosus, pulmonic stenosis, situs inversus viscerum, and asplenia and/or polysplenia. Defects in ZIC3 are a cause of VACTERL association X- linked with or without hydrocephalus (VACTERLX). A syndrome characterized by vertebral anomalies, anal atresia, cardiac malformations, tracheoesophageal fistula, renal anomalies (urethral atresia with hydronephrosis), and limb anomalies (hexadactyly, humeral hypoplasia, radial aplasia, and proximally placed thumb). Some patients may have hydrocephalus. Some cases of VACTERL-H are associated with increased chromosome breakage and rearrangement. Belongs to the GLI C2H2-type zinc-finger protein family. 2 isoforms of the human protein are produced by alternative splicing.
Protein type: DNA-binding; C2H2-type zinc finger protein; Transcription factor
Chromosomal Location of Human Ortholog: Xq26.2
Cellular Component: nucleoplasm; cytoplasm; nucleus
Molecular Function: protein binding; sequence-specific DNA binding; metal ion binding; transcription factor activity
Biological Process: anterior/posterior pattern formation; transcription, DNA-dependent; somatic stem cell maintenance; positive regulation of transcription, DNA-dependent; positive regulation of transcription from RNA polymerase II promoter; heart looping; determination of left/right symmetry; lung development
Disease: Vacterl Association, X-linked, With Or Without Hydrocephalus; Heterotaxy, Visceral, 1, X-linked
Research Articles on ZIC3
Similar Products
Product Notes
The ZIC3 zic3 (Catalog #AAA1753637) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-ZIC3 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's ZIC3 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Mouse, Rat| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the ZIC3 zic3 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "ZIC3, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
