Western Blot (WB)
(Figure 1. Western blot analysis of SLK using anti-SLK antibody (MBS1750680).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: human Hela whole cell lysates,Lane 2: human PANC-1 whole cell lysates,Lane 3: human 22RV1 whole cell lysates.
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-SLK antigen affinity purified polyclonal antibody at 0.5ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for SLK at approximately 200KD. The expected band size for SLK is at 143KD. )
Rabbit SLK Polyclonal Antibody | anti-SLK antibody
Anti-SLK antibody
No cross reactivity with other proteins.
No cross reactivity with other proteins.
Immunohistochemistry(Frozen Section): 0.5-1mug/ml
ICC: 0.5-1mug/ml
FC/FACS: 1-3g/1x10 6 cells
Direct ELISA: 0.1-0.5mug/ml
Western Blot (WB)
(Figure 1. Western blot analysis of SLK using anti-SLK antibody (MBS1750680). Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions. Lane 1: human Hela whole cell lysates,Lane 2: human PANC-1 whole cell lysates,Lane 3: human 22RV1 whole cell lysates. After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-SLK antigen affinity purified polyclonal antibody at 0.5ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for SLK at approximately 200KD. The expected band size for SLK is at 143KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of SLK using anti-SLK antibody (MBS1750680).
Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.
Lane 1: human Hela whole cell lysates,Lane 2: human PANC-1 whole cell lysates,Lane 3: human 22RV1 whole cell lysates.
After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1.5 hour at RT. The membrane was incubated with rabbit anti-SLK antigen affinity purified polyclonal antibody at 0.5ug/mL overnight at 4 degree C, then washed with TBS-0.1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1.5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit with Tanon 5200 system. A specific band was detected for SLK at approximately 200KD. The expected band size for SLK is at 143KD. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of U20S cells using anti-SLK antibody (MBS1750680).Overlay histogram showing U20S cells stained with MBS1750680 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-SLK Antibody (MBS1750680,1ug/1x10^6 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10ug/1x10^6 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of U20S cells using anti-SLK antibody (MBS1750680).Overlay histogram showing U20S cells stained with MBS1750680 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-SLK Antibody (MBS1750680,1ug/1x10^6 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10ug/1x10^6 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of U251 cells using anti-SLK antibody (MBS1750680).Overlay histogram showing U251 cells stained with MBS1750680 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-SLK Antibody (MBS1750680,1ug/1x10^6 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10ug/1x10^6 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of U251 cells using anti-SLK antibody (MBS1750680).Overlay histogram showing U251 cells stained with MBS1750680 (Blue line).The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-SLK Antibody (MBS1750680,1ug/1x10^6 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10ug/1x10^6 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1ug/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Protein Function: Mediates apoptosis and actin stress fiber dissolution.
NCBI and Uniprot Product Information
Uniprot Description
Mediates apoptosis and actin stress fiber dissolution.
Research Articles on SLK
Similar Products
Product Notes
The SLK slk (Catalog #AAA1750680) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-SLK antibody reacts with Human, Mouse, Rat No cross reactivity with other proteins. and may cross-react with other species as described in the data sheet. AAA Biotech's SLK can be used in a range of immunoassay formats including, but not limited to, ELISA (EIA), Flow Cytometry (FC/FACS), Immunohistochemistry (IHC), Immunocytochemistry (ICC), Western Blot (WB). WB: 0.1-0.5mug/ml Immunohistochemistry(Frozen Section): 0.5-1mug/ml ICC: 0.5-1mug/ml FC/FACS: 1-3g/1x10 6 cells Direct ELISA: 0.1-0.5mug/ml. Researchers should empirically determine the suitability of the SLK slk for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "SLK, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
