Western Blot (WB)
(Figure 1. Western blot analysis of OXCT1/SCOT using anti-OXCT1/SCOT antibody (MBS1753759).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEK293 whole cell lysatesLane 3: monkey heart tissue lysatesLane 4: human placenta tissue lysatesLane 5: rat heart tissue lysatesLane 6: rat brain tissue lysatesLane 7: rat kidney tissue lysatesLane 8: mouse heart tissue lysates, Lane 9: mouse kidney tissue lysates, Lane 10: mouse ANA-1 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-OXCT1/SCOT antigen affinity purified polyclonal antibody (Catalog # MBS1753759) at 0. 25 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for OXCT1/SCOT at approximately 56KD. The expected band size for OXCT1/SCOT is at 56KD. )
Rabbit OXCT1/SCOT Polyclonal Antibody | anti-OXCT1 antibody
Anti-OXCT1/SCOT Antibody
ICC/IF: 5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of OXCT1/SCOT using anti-OXCT1/SCOT antibody (MBS1753759).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEK293 whole cell lysatesLane 3: monkey heart tissue lysatesLane 4: human placenta tissue lysatesLane 5: rat heart tissue lysatesLane 6: rat brain tissue lysatesLane 7: rat kidney tissue lysatesLane 8: mouse heart tissue lysates, Lane 9: mouse kidney tissue lysates, Lane 10: mouse ANA-1 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-OXCT1/SCOT antigen affinity purified polyclonal antibody (Catalog # MBS1753759) at 0. 25 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for OXCT1/SCOT at approximately 56KD. The expected band size for OXCT1/SCOT is at 56KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of OXCT1/SCOT using anti-OXCT1/SCOT antibody (MBS1753759).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEK293 whole cell lysatesLane 3: monkey heart tissue lysatesLane 4: human placenta tissue lysatesLane 5: rat heart tissue lysatesLane 6: rat brain tissue lysatesLane 7: rat kidney tissue lysatesLane 8: mouse heart tissue lysates, Lane 9: mouse kidney tissue lysates, Lane 10: mouse ANA-1 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-OXCT1/SCOT antigen affinity purified polyclonal antibody (Catalog # MBS1753759) at 0. 25 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for OXCT1/SCOT at approximately 56KD. The expected band size for OXCT1/SCOT is at 56KD. )
Immunofluorescence (IF)
(Figure 2. IF analysis of OXCT1/SCOT using anti-OXCT1/SCOT antibody (MBS1753759).OXCT1/SCOT was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti-OXCT1/SCOT Antibody (MBS1753759) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Immunofluorescence (IF)
(Figure 2. IF analysis of OXCT1/SCOT using anti-OXCT1/SCOT antibody (MBS1753759).OXCT1/SCOT was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti-OXCT1/SCOT Antibody (MBS1753759) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of U87 cells using anti-OXCT1/SCOT antibody (MBS1753759).Overlay histogram showing U87 cells stained with MBS1753759 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-OXCT1/SCOT Antibody (MBS1753759, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of U87 cells using anti-OXCT1/SCOT antibody (MBS1753759).Overlay histogram showing U87 cells stained with MBS1753759 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-OXCT1/SCOT Antibody (MBS1753759, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Hori, T., Fukao, T., Murase, K., Sakaguchi, N., Harding, C. O., Kondo, N. Molecular basis of two-exon skipping (exons 12 and 13) by c. 1248+5g-a in OXCT1 gene: study on intermediates of OXCT1 transcripts in fibroblasts. Hum. Mutat. 34: 473-480, 2013.
3. Kassovska-Bratinova, S., Fukao, T., Song, X. -Q., Duncan, A. M. V., Chen, H. S., Robert, M. -F., Perez-Cerda, C., Ugarte, M., Chartrand, C., Vobecky, S., Kondo, N., Mitchell, G. A. Succinyl CoA:3-oxoacid CoA transferase (SCOT): human cDNA cloning, human chromosomal mapping to 5p13, and mutation detection in a SCOT-deficient patient. Am. J. Hum. Genet. 59: 519-528, 1996.
NCBI and Uniprot Product Information
NCBI Description
This gene encodes a member of the 3-oxoacid CoA-transferase gene family. The encoded protein is a homodimeric mitochondrial matrix enzyme that plays a central role in extrahepatic ketone body catabolism by catalyzing the reversible transfer of coenzyme A from succinyl-CoA to acetoacetate. Mutations in this gene are associated with succinyl CoA:3-oxoacid CoA transferase deficiency. [provided by RefSeq, Jul 2008]
Uniprot Description
Key enzyme for ketone body catabolism. Transfers the CoA moiety from succinate to acetoacetate. Formation of the enzyme-CoA intermediate proceeds via an unstable anhydride species formed between the carboxylate groups of the enzyme and substrate.
Research Articles on OXCT1
Similar Products
Product Notes
The OXCT1 oxct1 (Catalog #AAA1753759) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-OXCT1/SCOT Antibody reacts with Human, Mouse, Rat, Monkey and may cross-react with other species as described in the data sheet. AAA Biotech's OXCT1/SCOT can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunocytochemistry (ICC), Immunofluorescence (IF), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.1-0.25ug/ml|Human, Mouse, Rat, Monkey| ICC/IF: 5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the OXCT1 oxct1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "OXCT1/SCOT, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
