Loading...

Skip to main content

Call us on + 1 (800) 604-9114 for more information about our products

Looking for specific datasheet Manual/COA/MSDS?
Request a Manual/COA/MSDS

Interested to get a quote about our products?
Request a Quote

Western Blot (WB) (Anti-Fibronectin Fragment 2 rabbit polyclonal antibody at 1:500 dilution Lane A: NIH-3T3 Whole Cell Lysate Lysates/proteins at 30 ug per lane. Secondary Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution. Developed using the ECL technique. Performed under reducing conditions. Predicted band size:262 kDa Observed band size:300 kDa)

Rabbit anti-Human Fibronectin Polyclonal Antibody | anti-FN1 antibody

Anti-Fibronectin Antibody, Rabbit Polyclonal

Reactivity
Human
Applications
Western Blot, ELISA, Immunocytochemistry, Immunofluorescence
Purity
Protein A & Antigen Affinity
Synonyms
Fibronectin; Polyclonal Antibody; Anti-Fibronectin Antibody; Rabbit Polyclonal; Fibronectin Antibody; Rabbit PAb; Antigen Affinity Purified; fibronectin 1; Anti-CIG Antibody; Anti-ED-B Antibody; Anti-FINC Antibody; Anti-FN Antibody; Anti-FNZ Antibody; Anti-GFND Antibody; Anti-GFND2 Antibody; Anti-LETS Antibody; Anti-MSF Antibody; anti-FN1 antibody
Ordering
For Research Use Only!
Host
Rabbit
Reactivity
Human
Clonality
Polyclonal
Isotype
Rabbit IgG
Specificity
Human Fibronectin
Purity/Purification
Protein A & Antigen Affinity
Form/Format
Liquid; 0.2um filtered solution in PBS
Applicable Applications for anti-FN1 antibody
Western Blot (WB), ELISA (EIA), Immunocytochemistry (ICC), Immunofluorescence (IF)
Application Notes
WB: 1:500-1:2000
ELISA: 1:5000-1:10,000
ICC/IF: 1:300-1:10,000
Immunogen
Recombinant Human Fibronectin Protein
Conjugation
Unconjugated
Preparation
Produced in rabbits immunized with purified, recombinant Human Fibronectin (rh Fibronectin). Fibronectin specific IgG was purified by Human Fibronectin affinity chromatography.
Preparation and Storage
This antibody can be stored at 2-8 degree C for one month without detectable loss of activity. Antibody products are stable for twelve months from date of receipt when stored at -20 degree C to -80 degree C. Preservative-Free. Avoid repeated freeze-thaw cycles.

Western Blot (WB)

(Anti-Fibronectin Fragment 2 rabbit polyclonal antibody at 1:500 dilution Lane A: NIH-3T3 Whole Cell Lysate Lysates/proteins at 30 ug per lane. Secondary Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution. Developed using the ECL technique. Performed under reducing conditions. Predicted band size:262 kDa Observed band size:300 kDa)

Western Blot (WB) (Anti-Fibronectin Fragment 2 rabbit polyclonal antibody at 1:500 dilution Lane A: NIH-3T3 Whole Cell Lysate Lysates/proteins at 30 ug per lane. Secondary Goat Anti-Rabbit IgG (H+L)/HRP at 1/10000 dilution. Developed using the ECL technique. Performed under reducing conditions. Predicted band size:262 kDa Observed band size:300 kDa)

Immunofluorescence (IF)

(Immunofluorescence staining of Fibronectin Fragment 2 in HeLa cells. Cells were fixed with 4% PFA, permeabilzed with 0.1% Triton X-100 in PBS,blocked with 10% serum, and incubated with rabbit anti-human Fibronectin Fragment 2 polyclonal antibody (dilution ratio 1:1000) at 4 degree C overnight. Then cells were stained with the Alexa Fluor$488-conjugated Goat Anti-rabbit IgG secondary antibody (green) and counterstained with DAPI (blue).Positive staining was localized to cytoplasm.)

Immunofluorescence (IF) (Immunofluorescence staining of Fibronectin Fragment 2 in HeLa cells. Cells were fixed with 4% PFA, permeabilzed with 0.1% Triton X-100 in PBS,blocked with 10% serum, and incubated with rabbit anti-human Fibronectin Fragment 2 polyclonal antibody (dilution ratio 1:1000) at 4 degree C overnight. Then cells were stained with the Alexa Fluor$488-conjugated Goat Anti-rabbit IgG secondary antibody (green) and counterstained with DAPI (blue).Positive staining was localized to cytoplasm.)
Related Product Information for anti-FN1 antibody
Fibronectin (FN) is a glycoprotein component of the extracellular matrix of the extracellular matrix (ECM) with roles in embryogenesis, development, and wound healing. More recently, FN has emerged as player in platelet thrombus formation and diseases associated with thrombosis including vascular remodeling, atherosclerosis, and cardiac repair following a myocardial infarct. Each monomer of FN consists of three types of homologous repeating units, that is 12 type I repeats, two type II repeats and 15-17 type III repeats. The occurrence of multiple isoforms results from alternative mRNA splicing of the ED-A, ED-B and III-CS regions, and subsequent post-translational modification. As an ECM component and one of the primary cell adhesion molecules, Fibronectin can be a ligand for fibrin, heparin, chondroitin sulfate, collagen/gelatin, as well as many integrin receptors through which FN mediates the variety of cellular signaling pathways. The study of solid human tumors showed among the early signs of malignant transformation the fragmentation of pericellular FN, concommitent with the increase of its production by the peritumoral stroma. These results should encourage further investigations concerning the potential importance of Fn production and breakdown during cancer progression. FN1 expression has been described to increase significantly from the morula towards the early blastocyst stage, suggesting that FN1 may also be involved in early blastocyst formation. The fragment 2 of FN comprises the first 7 FN type III repeats and is suggested to be important for self association during fibril growth via the key module III2.
References
Labat-Robert J. (2002) Fibronectin in malignancy. Semin Cancer Biol. 12(3): 187-95.Goossens K, et al. (2009) Quantification of fibronectin 1 (FN1) splice variants, including two novel ones, and analysis of integrins as candidate FN1 receptors in bovine preimplantation embryos. BMC Dev Biol. 9: 1.Maurer LM, et al. (2010) Emerging roles of fibronectin in thrombosis. Thromb Res. 125(4): 287-91.

NCBI and Uniprot Product Information

Protein Family

Similar Products

Product Notes

The FN1 (Catalog #AAA8102228) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-Fibronectin Antibody, Rabbit Polyclonal reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's Fibronectin can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), ELISA (EIA), Immunocytochemistry (ICC), Immunofluorescence (IF). WB: 1:500-1:2000 ELISA: 1:5000-1:10,000 ICC/IF: 1:300-1:10,000. Researchers should empirically determine the suitability of the FN1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "Fibronectin, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Looking for a specific manual?
Request a Manual

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.