Western Blot (WB)
(Figure 1. Western blot analysis of EAAT3/SLC1A1 using anti-EAAT3/SLC1A1 antibody (MBS1753520).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat kidney tissue lysatesLane 2: mouse kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-EAAT3/SLC1A1 antigen affinity purified polyclonal antibody (Catalog # MBS1753520) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for EAAT3/SLC1A1 at approximately 70KD. The expected band size for EAAT3/SLC1A1 is at 70KD. )
Rabbit EAAT3/SLC1A1 Polyclonal Antibody | anti-SLC1A1 antibody
Anti-EAAT3/SLC1A1 Antibody
Gene Names
SLC1A1; EAAC1; EAAT3; SCZD18
Reactivity
Human, Mouse, Rat
Applications
Western Blot, ELISA
Purity
Immunogen affinity purified.
Synonyms
EAAT3/SLC1A1; Polyclonal Antibody; Anti-EAAT3/SLC1A1 Antibody; Excitatory amino acid transporter 3; Excitatory amino-acid carrier 1; Neuronal and epithelial glutamate transporter; Sodium-dependent glutamate/aspartate transporter 3; Solute carrier family 1 member 1; SLC1A1; EAAC1; EAAT3; solute carrier family 1 member 1; anti-SLC1A1 antibody
Host
Rabbit
Reactivity
Human, Mouse, Rat
Clonality
Polyclonal
Isotype
Rabbit IgG
Specificity
Rabbit IgG polyclonal antibody for EAAT3/SLC1A1 detection.
Purity/Purification
Immunogen affinity purified.
Form/Format
Lyophilized. Each vial contains 4mg Trehalose, 0.9mg NaCl, 0.2mg Na2HPO4, 0.01mg NaN3.
Applicable Applications for anti-SLC1A1 antibody
Western Blot (WB), Direct ELISA (EIA)
Application Notes
WB: 0.25-0.5ug/ml|Mouse, Rat|
Direct ELISA: 0.1-0.5ug/ml|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Immunogen
E Coli-derived human EAAT3/SLC1A1 recombinant protein (Position: Q160-F524).
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Recommended Detection Systems
Recommended Detection Systems
Preparation and Storage
Store at -20 degree C for one year. After reconstitution, at 4 degree C for one month. It can also be aliquotted and stored frozen at -20 degree C for a longer time. Avoid repeated freezing and thawing.
Western Blot (WB)
(Figure 1. Western blot analysis of EAAT3/SLC1A1 using anti-EAAT3/SLC1A1 antibody (MBS1753520).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat kidney tissue lysatesLane 2: mouse kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-EAAT3/SLC1A1 antigen affinity purified polyclonal antibody (Catalog # MBS1753520) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for EAAT3/SLC1A1 at approximately 70KD. The expected band size for EAAT3/SLC1A1 is at 70KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of EAAT3/SLC1A1 using anti-EAAT3/SLC1A1 antibody (MBS1753520).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat kidney tissue lysatesLane 2: mouse kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-EAAT3/SLC1A1 antigen affinity purified polyclonal antibody (Catalog # MBS1753520) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for EAAT3/SLC1A1 at approximately 70KD. The expected band size for EAAT3/SLC1A1 is at 70KD. )
Related Product Information for anti-SLC1A1 antibody
Solute carrier family 1 member 1, also called SLC1A1, is a protein that in humans is encoded by the SLC1A1 gene. By Southern analysis of a panel of human/rodent somatic cell hybrids and by fluorescence in situ hybridization(FISH), this gene is mapped to 9p24. 2. This gene encodes a member of the high-affinity glutamate transporters that play an essential role in transporting glutamate across plasma membranes. In brain, these transporters are crucial in terminating the postsynaptic action of the neurotransmitter glutamate, and in maintaining extracellular glutamate concentrations below neurotoxic levels. This transporter also transports aspartate, and mutations in this gene are though to cause dicarboxylicamino aciduria, also known as glutamate-aspartate transport defect.
References
1. Berman, A. E., Chan, W. Y., Brennan, A. M., Reyes, R. C., Adler, B. L., Suh, S. W., Kauppinen, T. M., Edling, Y., Swanson, R. A. N-acetylcysteine prevents loss of dopaminergic neurons in the EAAC1-/- mouse. Ann. Neurol. 69: 509-520, 2011.
2. Myles-Worsley, M., Tiobech, J., Browning, S. R., Korn, J., Goodman, S., Gentile, K., Melhem, N., Byerley, W., Faraone, S. V., Middleton, F. A. Deletion at the SLC1A1 glutamate transporter gene co-segregates with schizophrenia and bipolar schizoaffective disorder in a 5-generation family. Am. J. Med. Genet. 162B: 87-95, 2013.
2. Myles-Worsley, M., Tiobech, J., Browning, S. R., Korn, J., Goodman, S., Gentile, K., Melhem, N., Byerley, W., Faraone, S. V., Middleton, F. A. Deletion at the SLC1A1 glutamate transporter gene co-segregates with schizophrenia and bipolar schizoaffective disorder in a 5-generation family. Am. J. Med. Genet. 162B: 87-95, 2013.
NCBI and Uniprot Product Information
NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
Molecular Weight
524
NCBI Official Full Name
excitatory amino acid transporter 3
NCBI Official Synonym Full Names
solute carrier family 1 (neuronal/epithelial high affinity glutamate transporter, system Xag), member 1
NCBI Official Symbol
SLC1A1
NCBI Official Synonym Symbols
EAAC1; EAAT3; SCZD18
NCBI Protein Information
excitatory amino acid transporter 3; excitatory amino acid carrier 1; solute carrier family 1 member 1; neuronal and epithelial glutamate transporter; sodium-dependent glutamate/aspartate transporter 3
UniProt Protein Name
Excitatory amino acid transporter 3
Protein Family
UniProt Gene Name
SLC1A1
UniProt Synonym Gene Names
EAAC1; EAAT3
UniProt Entry Name
EAA3_HUMAN
Similar Products
Product Notes
The SLC1A1 slc1a1 (Catalog #AAA1753520) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-EAAT3/SLC1A1 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's EAAT3/SLC1A1 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Mouse, Rat| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the SLC1A1 slc1a1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "EAAT3/SLC1A1, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
