Loading...

Skip to main content

Call us on + 1 (800) 604-9114 for more information about our products

Looking for specific datasheet Manual/COA/MSDS?
Request a Manual/COA/MSDS

Interested to get a quote about our products?
Request a Quote

SDS-Page (W estern Blotting Experiment Lysates prepared from Hek293T cells transfected with rat WT BimEL alone (1, 4), cotransfected with rat WT BimEL and activated MEKK1 (MEKK1Δ) (2, 5) or with mutant S65A BimEL and MEKK1Δ (3, 6), were resolved by SDSPAGE on a 14% polyacrylamide gel and transferred to PVDF. Membranes were blocked with 3% Milk-TBST buffer for one hour at room temperature, and incubated with Bim Pan antibody (1, 2, 3) or BimEL [pS65] (4, 5, 6) for two hours at room temperature in 3% Milk-TBST buffer. After washing, membranes were incubated with goat F(ab’)2 anti-rabbit IgG HRP conjugate and bands were detected using standard methods. The data show that the signal is detected only in lysates co-expressing rat WT BimEL and active MEKK1 (MEKK1Δ). This signal is abolished in cells expressing mutant rat BimEL S65A and MEKK1, verifying that the signal is site-phosphospecific.)

Rabbit anti-Human, Rat BimEL Polyclonal Antibody | anti-BCL2L11 antibody

BimEL, phosphorylated (Ser65) (Bcl2 interacting mediator of cell death)

Gene Names
BCL2L11; BAM; BIM; BOD
Reactivity
Human, Rat
Applications
Western Blot
Purity
Serum
Serum.
Synonyms
BimEL; Polyclonal Antibody; phosphorylated (Ser65) (Bcl2 interacting mediator of cell death); Anti -BimEL; anti-BCL2L11 antibody
Ordering
For Research Use Only!
Host
Rabbit
Reactivity
Human, Rat
Clonality
Polyclonal
Specificity
This antibody is observed to react with human BimEL when phosphorylated atserine 69. Species Crossreactivity
Purity/Purification
Serum
Serum.
Form/Format
Supplied in Dulbecco's phosphate buffered saline (without Mg2+ and Ca2+), pH 7.3 (+/- 0.1), 50% glycerol, with 1mg/ml BSA (IgG, protease free), 0.05% sodium azide.
Applicable Applications for anti-BCL2L11 antibody
Western Blot (WB)
Application Notes
Suitable for use in Western Blot.
Dilution: Western Blot: 1:1000
Immunogen
The antiserum was produced against a chemically synthesized phosphopeptide derived from the region of rat BimEL that contains serine 65 (serine 69 in the human sequence). The sequence is conserved in human and mouse.
Preparation and Storage
May be stored at 4 degree C for short-term only. For long-term storage, store at -20 degree C. Aliquots are stable for at least 12 months at -20 degree C. For maximum recovery of product, centrifuge the original vial after thawing and prior to removing the cap. Further dilutions can be made in assay buffer.

SDS-Page

(W estern Blotting Experiment Lysates prepared from Hek293T cells transfected with rat WT BimEL alone (1, 4), cotransfected with rat WT BimEL and activated MEKK1 (MEKK1Δ) (2, 5) or with mutant S65A BimEL and MEKK1Δ (3, 6), were resolved by SDSPAGE on a 14% polyacrylamide gel and transferred to PVDF. Membranes were blocked with 3% Milk-TBST buffer for one hour at room temperature, and incubated with Bim Pan antibody (1, 2, 3) or BimEL [pS65] (4, 5, 6) for two hours at room temperature in 3% Milk-TBST buffer. After washing, membranes were incubated with goat F(ab’)2 anti-rabbit IgG HRP conjugate and bands were detected using standard methods. The data show that the signal is detected only in lysates co-expressing rat WT BimEL and active MEKK1 (MEKK1Δ). This signal is abolished in cells expressing mutant rat BimEL S65A and MEKK1, verifying that the signal is site-phosphospecific.)

SDS-Page (W estern Blotting Experiment Lysates prepared from Hek293T cells transfected with rat WT BimEL alone (1, 4), cotransfected with rat WT BimEL and activated MEKK1 (MEKK1Δ) (2, 5) or with mutant S65A BimEL and MEKK1Δ (3, 6), were resolved by SDSPAGE on a 14% polyacrylamide gel and transferred to PVDF. Membranes were blocked with 3% Milk-TBST buffer for one hour at room temperature, and incubated with Bim Pan antibody (1, 2, 3) or BimEL [pS65] (4, 5, 6) for two hours at room temperature in 3% Milk-TBST buffer. After washing, membranes were incubated with goat F(ab’)2 anti-rabbit IgG HRP conjugate and bands were detected using standard methods. The data show that the signal is detected only in lysates co-expressing rat WT BimEL and active MEKK1 (MEKK1Δ). This signal is abolished in cells expressing mutant rat BimEL S65A and MEKK1, verifying that the signal is site-phosphospecific.)
Product Categories/Family for anti-BCL2L11 antibody

NCBI and Uniprot Product Information

NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
Molecular Weight
22,171 Da
NCBI Official Full Name
bcl-2-like protein 11 isoform 1
NCBI Official Synonym Full Names
BCL2-like 11 (apoptosis facilitator)
NCBI Official Symbol
BCL2L11
NCBI Official Synonym Symbols
BAM; BIM; BOD
NCBI Protein Information
bcl-2-like protein 11; bcl-2 interacting protein Bim; bcl-2-related ovarian death agonist; bcl-2 interacting mediator of cell death
UniProt Protein Name
Bcl-2-like protein 11
Protein Family
UniProt Gene Name
BCL2L11
UniProt Synonym Gene Names
BIM; Bcl2-L-11
UniProt Entry Name
B2L11_HUMAN

NCBI Description

The protein encoded by this gene belongs to the BCL-2 protein family. BCL-2 family members form hetero- or homodimers and act as anti- or pro-apoptotic regulators that are involved in a wide variety of cellular activities. The protein encoded by this gene contains a Bcl-2 homology domain 3 (BH3). It has been shown to interact with other members of the BCL-2 protein family and to act as an apoptotic activator. The expression of this gene can be induced by nerve growth factor (NGF), as well as by the forkhead transcription factor FKHR-L1, which suggests a role of this gene in neuronal and lymphocyte apoptosis. Transgenic studies of the mouse counterpart suggested that this gene functions as an essential initiator of apoptosis in thymocyte-negative selection. Several alternatively spliced transcript variants of this gene have been identified. [provided by RefSeq, Jun 2013]

Uniprot Description

BIM: a pro-apoptotic member of the BCL-2 protein family. Interacts with other members of the BCL-2 protein family, including BCL2, BCL2L1/BCL-X(L), and MCL1, and act as an apoptotic activator. Its expression can be induced by nerve growth factor (NGF), as well as by the forkhead transcription factor FKHR-L1, which suggests a role in neuronal and lymphocyte apoptosis. Transgenic studies in the mouse suggested that this protein functions as an essential initiator of the apoptosis in thymocyte-negative selection. Nineteen alternatively spliced transcript variants of this gene have been reported.

Protein type: Apoptosis

Chromosomal Location of Human Ortholog: 2q13

Cellular Component: microtubule; mitochondrial outer membrane; extrinsic to membrane; endomembrane system; cytosol

Molecular Function: protein binding; microtubule binding

Biological Process: nerve growth factor receptor signaling pathway; positive regulation of apoptosis; apoptosis; cell-matrix adhesion; pigmentation during development; myeloid cell homeostasis; B cell apoptosis; ear development; positive regulation of caspase activity; cellular process regulating host cell cycle in response to virus; positive regulation of apoptosis by virus; mammary gland development; B cell homeostasis; positive regulation of neuron apoptosis; T cell homeostasis; kidney development; post-embryonic organ morphogenesis; spleen development; caspase activation; thymus development; positive regulation of protein homooligomerization; in utero embryonic development; male gonad development; positive regulation of cell cycle; regulation of organ growth; lumen formation; odontogenesis of dentine-containing teeth; DNA damage response, signal transduction resulting in induction of apoptosis; regulation of pigmentation during development; spermatogenesis; brain development

Research Articles on BCL2L11

Similar Products

Product Notes

The BCL2L11 bcl2l11 (Catalog #AAA614320) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The BimEL, phosphorylated (Ser65) (Bcl2 interacting mediator of cell death) reacts with Human, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's BimEL can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB). Suitable for use in Western Blot. Dilution: Western Blot: 1:1000. Researchers should empirically determine the suitability of the BCL2L11 bcl2l11 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "BimEL, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Looking for a specific manual?
Request a Manual

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.