Western Blot (WB)
(Figure 1. Western blot analysis of RPL13A using anti-RPL13A antibody (MBS1754023).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human Hek293 whole cell lysatesLane 2: human Hela whole cell lysatesLane 3: human K562 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with mouse anti- RPL13A antigen affinity purified monoclonal antibody (Catalog # MBS1754023) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-mouse IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176445) with Tanon 5200 system. A specific band was detected for RPL13A at approximately 24KD. The expected band size for RPL13A is at 24KD. )
Mouse anti-Human RPL13A Monoclonal Antibody | anti-RPL13A antibody
Anti-RPL13A Antibody (monoclonal, 4C9)
ICC/IF: 5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of RPL13A using anti-RPL13A antibody (MBS1754023).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human Hek293 whole cell lysatesLane 2: human Hela whole cell lysatesLane 3: human K562 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with mouse anti- RPL13A antigen affinity purified monoclonal antibody (Catalog # MBS1754023) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-mouse IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176445) with Tanon 5200 system. A specific band was detected for RPL13A at approximately 24KD. The expected band size for RPL13A is at 24KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of RPL13A using anti-RPL13A antibody (MBS1754023).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 30ug of sample under reducing conditions.Lane 1: human Hek293 whole cell lysatesLane 2: human Hela whole cell lysatesLane 3: human K562 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with mouse anti- RPL13A antigen affinity purified monoclonal antibody (Catalog # MBS1754023) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-mouse IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176445) with Tanon 5200 system. A specific band was detected for RPL13A at approximately 24KD. The expected band size for RPL13A is at 24KD. )
Immunofluorescence (IF)
(Figure 2. IF analysis of RPL13A using anti- RPL13A antibody (MBS1754023).RPL13A was detected in immunocytochemical section of CACO-2 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL mouse anti- RPL13A Antibody (MBS1754023) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Mouse IgG (BA1126) was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Immunofluorescence (IF)
(Figure 2. IF analysis of RPL13A using anti- RPL13A antibody (MBS1754023).RPL13A was detected in immunocytochemical section of CACO-2 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL mouse anti- RPL13A Antibody (MBS1754023) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Mouse IgG (BA1126) was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of A431 cells using anti-RPL13A antibody (MBS1754023).Overlay histogram showing A431 cells stained with MBS1754023 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with mouse anti-RPL13A Antibody (MBS1754023, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-mouse IgG (BA1126, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was mouse IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of A431 cells using anti-RPL13A antibody (MBS1754023).Overlay histogram showing A431 cells stained with MBS1754023 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with mouse anti-RPL13A Antibody (MBS1754023, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-mouse IgG (BA1126, 5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was mouse IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Price SR, Nightingale MS, Bobak DA, et al. (1993). "Conservation of a 23-kDa human transplantation antigen in mammalian species". Genomics. 14 (4): 959-964.
3. Nicoloso M, Qu LH, Michot B, Bachellerie JP (1996). "Intron-encoded, antisense small nucleolar RNAs: the characterization of nine novel species points to their direct role as guides for the 2'-O-ribose methylation of rRNAs". J. Mol. Biol. 260 (2): 178-195.
NCBI and Uniprot Product Information
Similar Products
Product Notes
The RPL13A rpl13a (Catalog #AAA1754023) is an Antibody produced from Mouse and is intended for research purposes only. The product is available for immediate purchase. The Anti-RPL13A Antibody (monoclonal, 4C9) reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's RPL13A can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunocytochemistry (ICC), Immunofluorescence (IF), Flow Cytometry (FC/FACS/FCM). WB: 0.25-0.5ug/ml|Human| ICC/IF: 5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human|. Researchers should empirically determine the suitability of the RPL13A rpl13a for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "RPL13A, Monoclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
