Loading...

Skip to main content

Call us on + 1 (800) 604-9114 for more information about our products

Looking for specific datasheet Manual/COA/MSDS?
Request a Manual/COA/MSDS

Interested to get a quote about our products?
Request a Quote

Mouse anti-Human HLA Class 2 Antigen DR7 Monoclonal Antibody | anti-HLA-DQB1 antibody

HLA Class 2 Antigen DR7 (X-Reactive)

Gene Names
HLA-DQB1; IDDM1; CELIAC1; HLA-DQB
Reactivity
Human
Applications
Flow Cytometry
Purity
Ascites
Synonyms
HLA Class 2 Antigen DR7; Monoclonal Antibody; HLA Class 2 Antigen DR7 (X-Reactive); Anti -HLA Class 2 Antigen DR7 (X-Reactive); anti-HLA-DQB1 antibody
Ordering
For Research Use Only!
Host
Mouse
Reactivity
Human
Clonality
Monoclonal
Isotype
IgM
Clone Number
4i127
Specificity
Recognizes the HLA Class 2 Antigen-DR7. Additional crossreactivity occurs with related proteins. Specificity was determined at a 1:10 dilution by the microcytotoxicity test under standard NIH conditions.
Purity/Purification
Ascites
Form/Format
Supplied as a lyophilized powder from PBS, 1% BSA. Reconstitute with 100ul sterile ddH2O to make a 10X stock solution.
Applicable Applications for anti-HLA-DQB1 antibody
This antibody has not been tested in methodologies other than Microcytotoxicity Test. Potential applications include Flow Cytometry, Cell Typing, Tissue Staining and Chimerism Studies.
Application Notes
Suitable for use in Flow Cytometry, Cell Typing, Tissue Staining, and Chimerism Studies.
Dilution: Cytotoxicity: Add 0.9ml of 1% BSA in PBS to 100ul of10X working dilution.
Source
Ascites Fluid
Cytotoxicity
Expected Results:
Cell death will occur in any test well where the HLA cell surface antigen is recognized by its matched anti-HLA antibody. Live lymphocytes indicate a negative reaction. Dead lymphocytes indicate a positive reaction.

Limitations:
Cell isolation difficulties, contamination of the lymphocyte preparation with red blood cells, monocytes, platelets or granulocytes, cell concentrations outside acceptable levels, bacterial contamination and/or change in pH of antisera may cause erroneous results.
Preparation and Storage
Lyophilized and reconstituted products are stable for 12 months after receipt at -20°C. Reconstitute with sterile PBS. Aliquot to avoid repeated freezing and thawing. Store at -20°C. For maximum recovery of product, centrifuge the original vial after thawing and prior to removing the cap. Further dilutions can be made in assay buffer.
Product Categories/Family for anti-HLA-DQB1 antibody

NCBI and Uniprot Product Information

NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
Molecular Weight
29,991 Da
NCBI Official Full Name
HLA class II histocompatibility antigen, DQ beta 1 chain isoform 2
NCBI Official Synonym Full Names
major histocompatibility complex, class II, DQ beta 1
NCBI Official Symbol
HLA-DQB1
NCBI Official Synonym Symbols
IDDM1; CELIAC1; HLA-DQB
NCBI Protein Information
HLA class II histocompatibility antigen, DQ beta 1 chain; MHC DQ beta; MHC class2 antigen; lymphocyte antigen; MHC class II antigen DQB1; MHC class II DQ beta chain; MHC class II antigen HLA-DQ-beta-1; MHC class II HLA-DQ beta glycoprotein
UniProt Protein Name
HLA class II histocompatibility antigen, DQ beta 1 chain
UniProt Gene Name
HLA-DQB1
UniProt Synonym Gene Names
HLA-DQB
UniProt Entry Name
DQB1_HUMAN

NCBI Description

HLA-DQB1 belongs to the HLA class II beta chain paralogs. This class II molecule is a heterodimer consisting of an alpha (DQA) and a beta chain (DQB), both anchored in the membrane. It plays a central role in the immune system by presenting peptides derived from extracellular proteins. Class II molecules are expressed in antigen presenting cells (APC: B lymphocytes, dendritic cells, macrophages). The beta chain is approximately 26-28 kDa and it contains six exons. Exon 1 encodes the leader peptide, exons 2 and 3 encode the two extracellular domains, exon 4 encodes the transmembrane domain and exon 5 encodes the cytoplasmic tail. Within the DQ molecule both the alpha chain and the beta chain contain the polymorphisms specifying the peptide binding specificities, resulting in up to four different molecules. Typing for these polymorphisms is routinely done for bone marrow transplantation. Alternative splicing results in multiple transcript variants. [provided by RefSeq, Sep 2011]

Uniprot Description

HLA-DQB1: Binds peptides derived from antigens that access the endocytic route of antigen presenting cells (APC) and presents them on the cell surface for recognition by the CD4 T-cells. The peptide binding cleft accommodates peptides of 10-30 residues. The peptides presented by MHC class II molecules are generated mostly by degradation of proteins that access the endocytic route, where they are processed by lysosomal proteases and other hydrolases. Exogenous antigens that have been endocytosed by the APC are thus readily available for presentation via MHC II molecules, and for this reason this antigen presentation pathway is usually referred to as exogenous. As membrane proteins on their way to degradation in lysosomes as part of their normal turn-over are also contained in the endosomal/lysosomal compartments, exogenous antigens must compete with those derived from endogenous components. Autophagy is also a source of endogenous peptides, autophagosomes constitutively fuse with MHC class II loading compartments. In addition to APCs, other cells of the gastrointestinal tract, such as epithelial cells, express MHC class II molecules and CD74 and act as APCs, which is an unusual trait of the GI tract. To produce a MHC class II molecule that presents an antigen, three MHC class II molecules (heterodimers of an alpha and a beta chain) associate with a CD74 trimer in the ER to form a heterononamer. Soon after the entry of this complex into the endosomal/lysosomal system where antigen processing occurs, CD74 undergoes a sequential degradation by various proteases, including CTSS and CTSL, leaving a small fragment termed CLIP (class-II-associated invariant chain peptide). The removal of CLIP is facilitated by HLA-DM via direct binding to the alpha-beta-CLIP complex so that CLIP is released. HLA-DM stabilizes MHC class II molecules until primary high affinity antigenic peptides are bound. The MHC II molecule bound to a peptide is then transported to the cell membrane surface. In B-cells, the interaction between HLA-DM and MHC class II molecules is regulated by HLA-DO. Primary dendritic cells (DCs) also to express HLA-DO. Lysosomal miroenvironment has been implicated in the regulation of antigen loading into MHC II molecules, increased acidification produces increased proteolysis and efficient peptide loading. Belongs to the MHC class II family.

Protein type: Membrane protein, integral

Chromosomal Location of Human Ortholog: 6p21.3

Cellular Component: Golgi membrane; membrane; lysosomal membrane; plasma membrane; endosome membrane; trans-Golgi network membrane; MHC class II protein complex

Molecular Function: MHC class II receptor activity; peptide antigen binding

Biological Process: humoral immune response mediated by circulating immunoglobulin; cytokine and chemokine mediated signaling pathway; T cell costimulation; antigen processing and presentation of exogenous peptide antigen via MHC class II; immune response; immunoglobulin production during immune response; T cell receptor signaling pathway

Disease: Celiac Disease; Creutzfeldt-jakob Disease; Multiple Sclerosis, Susceptibility To

Research Articles on HLA-DQB1

Similar Products

Product Notes

The HLA-DQB1 hla-dqb1 (Catalog #AAA603469) is an Antibody produced from Mouse and is intended for research purposes only. The product is available for immediate purchase. The HLA Class 2 Antigen DR7 (X-Reactive) reacts with Human and may cross-react with other species as described in the data sheet. AAA Biotech's HLA Class 2 Antigen DR7 can be used in a range of immunoassay formats including, but not limited to, This antibody has not been tested in methodologies other than Microcytotoxicity Test. Potential applications include Flow Cytometry, Cell Typing, Tissue Staining and Chimerism Studies. . Suitable for use in Flow Cytometry, Cell Typing, Tissue Staining, and Chimerism Studies. Dilution: Cytotoxicity: Add 0.9ml of 1% BSA in PBS to 100ul of10X working dilution. Researchers should empirically determine the suitability of the HLA-DQB1 hla-dqb1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "HLA Class 2 Antigen DR7, Monoclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.

Precautions

All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.

Disclaimer

Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.

Item has been added to Shopping Cart

If you are ready to order, navigate to Shopping Cart and get ready to checkout.

Looking for a specific manual?
Request a Manual

Request more Information

Please complete the form below and a representative will contact you as soon as possible.

Request a Manual

Please complete the form below and a representative will contact you as soon as possible.

Request a Quote

Please complete the form below and a representative will contact you as soon as possible.