Western Blot (WB)
(Figure 1. Western blot analysis of SLC14A1/UTE using anti-SLC14A1/UTE antibody (MBS1753679).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: mouse kidney tissue lysatesLane 2: mouse skeletal muscle tissue lysatesLane 3: mouse heart tissue lysatesLane 4: rat heart tissue lysatesLane 5: rat kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-SLC14A1/UTE antigen affinity purified polyclonal antibody (Catalog # MBS1753679) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for SLC14A1/UTE at approximately 48-50KD. The expected band size for SLC14A1/UTE is at 42KD. )
Rabbit anti-Mouse, Rat SLC14A1/UTE Polyclonal Antibody | anti-Slc14a1 antibody
Anti-SLC14A1/UTE Antibody
Gene Names
Slc14a1; UT-B; Utb1; 2610507K20Rik; 3021401A05Rik
Reactivity
Mouse, Rat
Applications
Western Blot, Flow Cytometry, Functional Assay
Purity
Immunogen affinity purified.
Synonyms
SLC14A1/UTE; Polyclonal Antibody; Anti-SLC14A1/UTE Antibody; Slc14a1; Urea transporter 1; Solute carrier family 14 member 1; Urea transporter B; UT-B; Urea transporter; erythrocyte; solute carrier family 14; anti-Slc14a1 antibody
Host
Rabbit
Reactivity
Mouse, Rat
Clonality
Polyclonal
Isotype
Rabbit IgG
Specificity
Rabbit IgG polyclonal antibody for SLC14A1/UTE detection.
Purity/Purification
Immunogen affinity purified.
Form/Format
Lyophilized. Each vial contains 4mg Trehalose, 0.9mg NaCl, 0.2mg Na2HPO4, 0.01mg NaN3.
Applicable Applications for anti-Slc14a1 antibody
Western Blot (WB), Flow Cytometry (FC/FACS/FCM)
Application Notes
WB: 0.25-0.5ug/ml|Mouse, Rat|
FC/FACS/FCM: 1-3ug/1x106 cells|Mouse|
FC/FACS/FCM: 1-3ug/1x106 cells|Mouse|
Immunogen
A synthetic peptide corresponding to a sequence of mouse SLC14A1/UTE (DMKEFANWLKDKPVVLQFMD).
Reconstitution
Add 0.2ml of distilled water will yield a concentration of 500ug/ml.
Recommended Detection Systems
Recommended Detection Systems
Preparation and Storage
Store at -20 degree C for one year. After reconstitution, at 4 degree C for one month. It can also be aliquotted and stored frozen at -20 degree C for a longer time. Avoid repeated freezing and thawing.
Western Blot (WB)
(Figure 1. Western blot analysis of SLC14A1/UTE using anti-SLC14A1/UTE antibody (MBS1753679).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: mouse kidney tissue lysatesLane 2: mouse skeletal muscle tissue lysatesLane 3: mouse heart tissue lysatesLane 4: rat heart tissue lysatesLane 5: rat kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-SLC14A1/UTE antigen affinity purified polyclonal antibody (Catalog # MBS1753679) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for SLC14A1/UTE at approximately 48-50KD. The expected band size for SLC14A1/UTE is at 42KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of SLC14A1/UTE using anti-SLC14A1/UTE antibody (MBS1753679).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: mouse kidney tissue lysatesLane 2: mouse skeletal muscle tissue lysatesLane 3: mouse heart tissue lysatesLane 4: rat heart tissue lysatesLane 5: rat kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-SLC14A1/UTE antigen affinity purified polyclonal antibody (Catalog # MBS1753679) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for SLC14A1/UTE at approximately 48-50KD. The expected band size for SLC14A1/UTE is at 42KD. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of HEPA1-6 cells using anti-SLC14A1/UTE antibody (MBS1753679).Overlay histogram showing HEPA1-6 cells stained with MBS1753679 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-SLC14A1/UTE Antibody (MBS1753679, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of HEPA1-6 cells using anti-SLC14A1/UTE antibody (MBS1753679).Overlay histogram showing HEPA1-6 cells stained with MBS1753679 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-SLC14A1/UTE Antibody (MBS1753679, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Related Product Information for anti-Slc14a1 antibody
Urea transporter 1 is a protein that in humans is encoded by the SLC14A1 gene. The SLC14A1 codes for a urea transporter (UTB) that is expressed in erythrocytes and kidney. SLC14A2 and SLC14A1 constitute solute carrier family 14. UTB proteins constitute the Kidd antigen system.
References
1. Gross, M. B. Personal Communication. Baltimore, Md. 2/16/2016.
2. Lucien, N., Chiaroni, J., Cartron, J. -P., Bailly, P. Partial deletion in the JK locus causing a Jk(null) phenotype. Blood 99: 1079-1081, 2002.
3. Lucien, N., Sidoux-Walter, F., Olives, B., Moulds, J., Le Pennec, P. -Y., Cartron, J. -P., Bailly, P. Characterization of the gene encoding the human Kidd blood group/urea transporter protein: evidence for splice site mutations in Jk-null individuals. J. Biol. Chem. 273: 12973-12980, 1998.
2. Lucien, N., Chiaroni, J., Cartron, J. -P., Bailly, P. Partial deletion in the JK locus causing a Jk(null) phenotype. Blood 99: 1079-1081, 2002.
3. Lucien, N., Sidoux-Walter, F., Olives, B., Moulds, J., Le Pennec, P. -Y., Cartron, J. -P., Bailly, P. Characterization of the gene encoding the human Kidd blood group/urea transporter protein: evidence for splice site mutations in Jk-null individuals. J. Biol. Chem. 273: 12973-12980, 1998.
NCBI and Uniprot Product Information
NCBI GI #
NCBI GeneID
NCBI Accession #
NCBI GenBank Nucleotide #
Molecular Weight
42,126 Da
NCBI Official Full Name
urea transporter 1 isoform a
NCBI Official Synonym Full Names
solute carrier family 14 (urea transporter), member 1
NCBI Official Symbol
Slc14a1
NCBI Official Synonym Symbols
UT-B; Utb1; 2610507K20Rik; 3021401A05Rik
NCBI Protein Information
urea transporter 1; urea transporter B; urea transporter, erythrocyte; solute carrier family 14 member 1
UniProt Protein Name
Urea transporter 1
Protein Family
UniProt Gene Name
Slc14a1
UniProt Synonym Gene Names
UT-B
UniProt Entry Name
UT1_MOUSE
Similar Products
Product Notes
The Slc14a1 slc14a1 (Catalog #AAA1753679) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-SLC14A1/UTE Antibody reacts with Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's SLC14A1/UTE can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Flow Cytometry (FC/FACS/FCM). WB: 0.25-0.5ug/ml|Mouse, Rat| FC/FACS/FCM: 1-3ug/1x106 cells|Mouse|. Researchers should empirically determine the suitability of the Slc14a1 slc14a1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "SLC14A1/UTE, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
