Western Blot (WB)
(Figure 1. Western blot analysis of MEKK2/MAP3K2 using anti-MEKK2/MAP3K2 antibody (MBS1753518).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HEK293 whole cell lysatesLane 2: human Hela whole cell lysatesLane 3: human K562 whole cell lysatesLane 4: human HepG2 whole cell lysatesLane 5: human MCF-7 whole cell lysatesLane 6: human Jurkat whole cell lysatesLane 7: rat kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-MEKK2/MAP3K2 antigen affinity purified polyclonal antibody (Catalog # MBS1753518) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for MEKK2/MAP3K2 at approximately 78KD. The expected band size for MEKK2/MAP3K2 is at 78KD. )
Rabbit anti-Human, Rat MEKK2/MAP3K2 Polyclonal Antibody | anti-MAP3K2 antibody
Anti-MEKK2/MAP3K2 Antibody
ICC/IF: 5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of MEKK2/MAP3K2 using anti-MEKK2/MAP3K2 antibody (MBS1753518).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HEK293 whole cell lysatesLane 2: human Hela whole cell lysatesLane 3: human K562 whole cell lysatesLane 4: human HepG2 whole cell lysatesLane 5: human MCF-7 whole cell lysatesLane 6: human Jurkat whole cell lysatesLane 7: rat kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-MEKK2/MAP3K2 antigen affinity purified polyclonal antibody (Catalog # MBS1753518) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for MEKK2/MAP3K2 at approximately 78KD. The expected band size for MEKK2/MAP3K2 is at 78KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of MEKK2/MAP3K2 using anti-MEKK2/MAP3K2 antibody (MBS1753518).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HEK293 whole cell lysatesLane 2: human Hela whole cell lysatesLane 3: human K562 whole cell lysatesLane 4: human HepG2 whole cell lysatesLane 5: human MCF-7 whole cell lysatesLane 6: human Jurkat whole cell lysatesLane 7: rat kidney tissue lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-MEKK2/MAP3K2 antigen affinity purified polyclonal antibody (Catalog # MBS1753518) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for MEKK2/MAP3K2 at approximately 78KD. The expected band size for MEKK2/MAP3K2 is at 78KD. )
Immunofluorescence (IF)
(Figure 2. IF analysis of MEKK2/MAP3K2 using anti- MEKK2/MAP3K2 antibody (MBS1753518).MEKK2/MAP3K2 was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti- MEKK2/MAP3K2 Antibody (MBS1753518) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Immunofluorescence (IF)
(Figure 2. IF analysis of MEKK2/MAP3K2 using anti- MEKK2/MAP3K2 antibody (MBS1753518).MEKK2/MAP3K2 was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti- MEKK2/MAP3K2 Antibody (MBS1753518) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of SiHa cells using anti-MEKK2/MAP3K2 antibody (MBS1753518).Overlay histogram showing SiHa cells stained with MBS1753518 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-MEKK2/MAP3K2 Antibody (MBS1753518, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of SiHa cells using anti-MEKK2/MAP3K2 antibody (MBS1753518).Overlay histogram showing SiHa cells stained with MBS1753518 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-MEKK2/MAP3K2 Antibody (MBS1753518, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Cazares LH, et al. Maging mass spectrometry of a specific fragment of mitogen-activated protein kinase/extracellular signal-regulated kinase kinase kinase 2 discriminates cancer from uninvolved prostate tissue. Clin Cancer Res, 2009 Sep 1.
NCBI and Uniprot Product Information
NCBI Description
The protein encoded by this gene is a member of serine/threonine protein kinase family. This kinase preferentially activates other kinases involved in the MAP kinase signaling pathway. This kinase has been shown to directly phosphorylate and activate Ikappa B kinases, and thus plays a role in NF-kappa B signaling pathway. This kinase has also been found to bind and activate protein kinase C-related kinase 2, which suggests its involvement in a regulated signaling process. [provided by RefSeq, Jul 2008]
Uniprot Description
MEKK2: a protein kinase of the STE11 family. Phosphorylates and activates MEK5. Involved in growth factor stimulated cell proliferation and differentiation.
Protein type: Kinase, protein; Protein kinase, STE; EC 2.7.11.25; Protein kinase, Ser/Thr (non-receptor); STE group; STE11 family
Chromosomal Location of Human Ortholog: 2q14.3
Cellular Component: nucleoplasm; cytoplasm; cytosol
Molecular Function: MAP kinase kinase activity; protein serine/threonine kinase activity; protein binding; MAP kinase kinase kinase activity; metal ion binding; protein kinase binding; ATP binding; protein kinase activity
Biological Process: activation of MAPKK activity; activation of MAPK activity; positive regulation of transcription, DNA-dependent; protein amino acid phosphorylation; activation of JNK activity
Research Articles on MAP3K2
Similar Products
Product Notes
The MAP3K2 map3k2 (Catalog #AAA1753518) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-MEKK2/MAP3K2 Antibody reacts with Human, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's MEKK2/MAP3K2 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunocytochemistry (ICC), Immunofluorescence (IF), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human, Rat| ICC/IF: 5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the MAP3K2 map3k2 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "MEKK2/MAP3K2, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
