Western Blot (WB)
(Figure 1. Western blot analysis of MLC1 using anti-MLC1 antibody (MBS1753562).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat brain tissue lysatesLane 2: mouse brain tissue lysatesLane 3: human SH-SY5Y whole cell lysatesLane 4: rat C6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-MLC1 antigen affinity purified polyclonal antibody (Catalog # MBS1753562) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for MLC1 at approximately 41KD. The expected band size for MLC1 is at 41KD. )
Rabbit MLC1 Polyclonal Antibody | anti-MLC1 antibody
Anti-MLC1 Antibody
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of MLC1 using anti-MLC1 antibody (MBS1753562).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat brain tissue lysatesLane 2: mouse brain tissue lysatesLane 3: human SH-SY5Y whole cell lysatesLane 4: rat C6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-MLC1 antigen affinity purified polyclonal antibody (Catalog # MBS1753562) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for MLC1 at approximately 41KD. The expected band size for MLC1 is at 41KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of MLC1 using anti-MLC1 antibody (MBS1753562).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat brain tissue lysatesLane 2: mouse brain tissue lysatesLane 3: human SH-SY5Y whole cell lysatesLane 4: rat C6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-MLC1 antigen affinity purified polyclonal antibody (Catalog # MBS1753562) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:10000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for MLC1 at approximately 41KD. The expected band size for MLC1 is at 41KD. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of THP-1 cells using anti-MLC1 antibody (MBS1753562).Overlay histogram showing THP-1 cells stained with MBS1753562 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-MLC1 Antibody (MBS1753562,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of THP-1 cells using anti-MLC1 antibody (MBS1753562).Overlay histogram showing THP-1 cells stained with MBS1753562 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-MLC1 Antibody (MBS1753562,1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Ilja Boor, P. K., de Groot, K., Mejaski-Bosnjak, V., Brenner, C., van der Knaap, M. S., Scheper, G. C., Pronk, J. C. Megalencephalic leukoencephalopathy with subcortical cysts: an update and extended mutation analysis of MLC1. Hum. Mutat. 27: 505-512, 2006.
3. Leegwater, P. A. J., Boor, P. K. I., Yuan, B. Q., van der Steen, J., Visser, A., Konst, A. A. M., Oudejans, C. B. M., Schutgens, R. B. H., Pronk, J. C., van der Knaap, M. S. Identification of novel mutations in MLC1 responsible for megalencephalic leukoencephalopathy with subcortical cysts. Hum. Genet. 110: 279-283, 2002. Note: Erratum: Hum. Genet. 111: 114 only, 2002.
NCBI and Uniprot Product Information
NCBI Description
The function of this gene product is unknown; however, homology to other proteins suggests that it may be an integral membrane transporter. Mutations in this gene have been associated with megalencephalic leukoencephalopathy with subcortical cysts, an autosomal recessive neurological disorder. Alternatively spliced transcript variants encoding different isoforms have been identified. [provided by RefSeq, Jul 2008]
Uniprot Description
MLC1: Regulates the response of astrocytes to hypo-osmosis by promoting calcium influx. Defects in MLC1 are a cause of leukoencephalopathy megalencephalic with subcortical cysts type 1 (MLC1). MLC1 is a syndrome of cerebral leukoencephalopathy and megalencephaly characterized by ataxia, spasticity, seizures, delay in motor development and mild mental retardation. The brain appears swollen on magnetic resonance imaging, with diffuse white- matter abnormalities and the invariable presence of subcortical cysts in frontal and temporal lobes.
Protein type: Cell surface; Membrane protein, integral; Transporter; Membrane protein, multi-pass
Chromosomal Location of Human Ortholog: 22q13.33
Cellular Component: clathrin-coated vesicle; lysosome; basolateral plasma membrane; endoplasmic reticulum; early endosome; integral to membrane; intercellular junction; caveola; lipid raft; recycling endosome; perinuclear region of cytoplasm; cytoplasm; apical plasma membrane; plasma membrane; cytoplasmic vesicle; endosome
Molecular Function: protein binding; transporter activity; protein complex binding; protein transporter activity
Biological Process: vesicle-mediated transport; protein transport; transport; positive regulation of intracellular transport; ion transport; protein oligomerization; regulation of response to osmotic stress
Disease: Megalencephalic Leukoencephalopathy With Subcortical Cysts 1
Research Articles on MLC1
Similar Products
Product Notes
The MLC1 mlc1 (Catalog #AAA1753562) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-MLC1 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's MLC1 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human, Mouse, Rat| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the MLC1 mlc1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "MLC1, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
