Rabbit Bisphenol A Polyclonal Antibody
Rabbit anti Bisphenol A
Reactivity
See "Species Reactivity Note" below.
Applications
ELISA
Purity
Caprylic acid
Synonyms
Bisphenol A; Polyclonal Antibody; Rabbit anti Bisphenol A; anti-Bisphenol A antibody
Host
Rabbit
Reactivity
See "Species Reactivity Note" below.
Clonality
Polyclonal
Isotype
Ig
Specificity
Immunogen: BSA-Bisphenol Valeric Acid (BVA), Target: Bisphenol A, CAS no.: 80-05-7, Solubility: Acetone, Ethanol, Ether, Benzene.
Purity/Purification
Caprylic acid
Form/Format
Each vial contains 0.5 ml 0.8 mg/ml of purified (caprylic acid) rabbit polyclonal IgG
Applicable Applications for anti-Bisphenol A antibody
ELISA (EIA), Immunoaffinity chromatography (IAC)
Application Notes
The antibody may be used in ELISA and IAC. Dilution of 1/15,000 from the delivered solution.(The titer is defined as the dilution that gives 50 % of the absorbance from the maximum absorbance when tested with ELISA)
Suggested concentration to use in ELISA : 1/15,000 from the delivered solution. HRP-conjugated derivative as a tracer
Host Note
Rabbit immune serum, purified by caprylic acid extraction.
Immunogen
BSA-Bisphenol Valeric Acid (BVA)
Product Type
Primary Antibodies
Species Reactivity Note
Species Reactivity: % Cross Reactivity in a direct assay: Molecules containing a phenolic roup: Bisphenol A 10% 4,4'-(ethylidenephenol 10% Bis-(4-hydroxy phenylmethane 1 % Nonylphenol 1 % 4-cumylphenol 20% Molecules lacking a phenlic group: Vinclozoli n0.1% Pirimifos-ethyl 0.1% 17ß-Estriol <0.1% 2,4 D 0.1 % Sulfadimidine< 0.1% % Cross Reactivity in an indirect assay: Molecules containing a phenlic group: Bisphenol 100% 4,4'-(ethylidene) bisphenol 1% Bis-(4-hydroxyphenyl)-met 1% 4-cumylphenol 100% Molecules lacking a phenlic group: Vinclozolin<0.1% Pirimifos-ethyl < 0.1% 2,4 D 0.1% Fenitrothion 0.1% Chlorpyrifos-methyl < 0.1% Erythromycine < 0.1%
Preparation and Storage
Store at 4 °C or aliquot and store at -20 °C for longer periods. Precautions should be taken upon storage for longer periods. Problems of long term stability may occur with highly diluted solutions. For long storage purposes in solution the addition of sodium azide at 0.02 % is advised with the appropriate precautions of use.
Related Product Information for anti-Bisphenol A antibody
Bisphenol A (BPA) is predominantly used in the production of polycarbonate plastics and epoxy resins that are used in many products. It is released into the environment and food. BPA is an endocrine disruptor with estrogenic and obesogenic properties. It influences reproduction and has an epigenetic effect already in the foetus.
Product Categories/Family for anti-Bisphenol A antibody
References
Eline P. Meulenberg, Kees Koopal and Ria Rhemrev - Immunoassays for alkylphenolic pollutants with endocrine disrupting activity. Intern. J. Environ. Anal. Chem. Vol 85, no 12-13, 15 October-15 November 2005, 871-883
Similar Products
Product Notes
The Bisphenol A (Catalog #AAA570377) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Rabbit anti Bisphenol A reacts with See "Species Reactivity Note" below. and may cross-react with other species as described in the data sheet. AAA Biotech's Bisphenol A can be used in a range of immunoassay formats including, but not limited to, ELISA (EIA), Immunoaffinity chromatography (IAC). The antibody may be used in ELISA and IAC. Dilution of 1/15,000 from the delivered solution.(The titer is defined as the dilution that gives 50 % of the absorbance from the maximum absorbance when tested with ELISA) Suggested concentration to use in ELISA : 1/15,000 from the delivered solution. HRP-conjugated derivative as a tracer. Researchers should empirically determine the suitability of the Bisphenol A for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "Bisphenol A, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
