Western Blot (WB)
(Figure 1. Western blot analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEPG2 whole cell lysatesLane 3: human U87 whole cell lysatesLane 4: rat stomach tissue lysatesLane 5: rat RH35 whole cell lysatesLane 6: mouse stomach tissue lysatesLane 7: mouse HEPA1-6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-DNAJC10 antigen affinity purified polyclonal antibody (Catalog # MBS1753779) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for DNAJC10 at approximately 91KD. The expected band size for DNAJC10 is at 91KD. )
Rabbit DNAJC10 Polyclonal Antibody | anti-DNAJC10 antibody
Anti-DNAJC10 Antibody
IHC-P: 2-5ug/ml|Human|
ICC/IF: 5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEPG2 whole cell lysatesLane 3: human U87 whole cell lysatesLane 4: rat stomach tissue lysatesLane 5: rat RH35 whole cell lysatesLane 6: mouse stomach tissue lysatesLane 7: mouse HEPA1-6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-DNAJC10 antigen affinity purified polyclonal antibody (Catalog # MBS1753779) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for DNAJC10 at approximately 91KD. The expected band size for DNAJC10 is at 91KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEPG2 whole cell lysatesLane 3: human U87 whole cell lysatesLane 4: rat stomach tissue lysatesLane 5: rat RH35 whole cell lysatesLane 6: mouse stomach tissue lysatesLane 7: mouse HEPA1-6 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-DNAJC10 antigen affinity purified polyclonal antibody (Catalog # MBS1753779) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for DNAJC10 at approximately 91KD. The expected band size for DNAJC10 is at 91KD. )
Immunohistochemistry (IHC)
(Figure 2. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human breast cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 2. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human breast cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 3. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human placenta tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 3. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human placenta tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 4. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human prostate cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 4. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human prostate cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 5. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human gastric cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunohistochemistry (IHC)
(Figure 5. IHC analysis of DNAJC10 using anti-DNAJC10 antibody (MBS1753779).DNAJC10 was detected in paraffin-embedded section of human gastric cancer tissue. Heat mediated antigen retrieval was performed in EDTA buffer (pH8. 0, epitope retrieval solution). The tissue section was blocked with 10% goat serum. The tissue section was then incubated with 2μg/ml rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. Biotinylated goat anti-rabbit IgG was used as secondary antibody and incubated for 30 minutes at 37 degree C. The tissue section was developed using Strepavidin-Biotin-Complex (SABC) (Catalog # MBS176451) with DAB as the chromogen. )
Immunofluorescence (IF)
(Figure 6. IF analysis of DNAJC10 using anti- DNAJC10 antibody (MBS1753779).DNAJC10 was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Immunofluorescence (IF)
(Figure 6. IF analysis of DNAJC10 using anti- DNAJC10 antibody (MBS1753779).DNAJC10 was detected in immunocytochemical section of A431 cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti-DNAJC10 Antibody (MBS1753779) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Flow Cytometry (FC/FACS)
(Figure 7. Flow Cytometry analysis of HELA cells using anti-DNAJC10 antibody (MBS1753779).Overlay histogram showing HELA cells stained with MBS1753779 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-DNAJC10 Antibody (MBS1753779, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 7. Flow Cytometry analysis of HELA cells using anti-DNAJC10 antibody (MBS1753779).Overlay histogram showing HELA cells stained with MBS1753779 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-DNAJC10 Antibody (MBS1753779, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Hosoda, A., Kimata, Y., Tsuru, A., Kohno, K. JPDI, a novel endoplasmic reticulum-resident protein containing both a BiP-interacting J-domain and thioredoxin-like motifs. J. Biol. Chem. 278: 2669-2676, 2003.
3. Ushioda, R., Hoseki, J., Araki, K., Jansen, G., Thomas, D. Y., Nagata, K. ERdj5 is required as a disulfide reductase for degradation of misfolded proteins in the ER. Science 321: 569-572, 2008
NCBI and Uniprot Product Information
NCBI Description
This gene encodes an endoplasmic reticulum co-chaperone which is part of the endoplasmic reticulum-associated degradation complex involved in recognizing and degrading misfolded proteins. The encoded protein reduces incorrect disulfide bonds in misfolded glycoproteins. Alternatively spliced transcript variants encoding multiple isoforms have been observed for this gene. [provided by RefSeq, Oct 2012]
Uniprot Description
DNAJC10: This endoplasmic reticulum co-chaperone may play a role in protein folding and translocation across the endoplasmic reticulum membrane. May act as a co-chaperone for HSPA5. 2 isoforms of the human protein are produced by alternative splicing.
Protein type: Chaperone; Secreted, signal peptide; Secreted; Endoplasmic reticulum
Chromosomal Location of Human Ortholog: 2q32.1
Cellular Component: membrane; endoplasmic reticulum; endoplasmic reticulum lumen
Molecular Function: disulfide oxidoreductase activity; protein binding; ATPase activator activity; chaperone binding; protein disulfide oxidoreductase activity; Hsp70 protein binding; misfolded protein binding; oxidoreductase activity, acting on sulfur group of donors, disulfide as acceptor; ATPase binding
Biological Process: ER-associated protein catabolic process; negative regulation of protein amino acid phosphorylation; positive regulation of ATPase activity; cell redox homeostasis
Research Articles on DNAJC10
Similar Products
Product Notes
The DNAJC10 dnajc10 (Catalog #AAA1753779) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-DNAJC10 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's DNAJC10 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunohistochemistry-Paraffin (IHC-P), Immunocytochemistry (ICC), Immunofluorescence (IF), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human, Mouse, Rat| IHC-P: 2-5ug/ml|Human| ICC/IF: 5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the DNAJC10 dnajc10 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "DNAJC10, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
