Western Blot (WB)
(Figure 1. Western blot analysis of PARP2 using anti-PARP2 antibody (MBS1753585).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat testis tissue lysatesLane 2: human HEK293 whole cell lysatesLane 3: human HL-60 whole cell lysatesLane 4: human U20S whole cell lysatesLane 5: human HepG2 whole cell lysatesLane 6: human A431 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-PARP2 antigen affinity purified polyclonal antibody (Catalog # MBS1753585) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for PARP2 at approximately 66KD. The expected band size for PARP2 is at 66KD. )
Rabbit anti-Human, Rat PARP2 Polyclonal Antibody | anti-PARP2 antibody
Anti-PARP2 Antibody
ICC/IF: 5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of PARP2 using anti-PARP2 antibody (MBS1753585).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat testis tissue lysatesLane 2: human HEK293 whole cell lysatesLane 3: human HL-60 whole cell lysatesLane 4: human U20S whole cell lysatesLane 5: human HepG2 whole cell lysatesLane 6: human A431 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-PARP2 antigen affinity purified polyclonal antibody (Catalog # MBS1753585) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for PARP2 at approximately 66KD. The expected band size for PARP2 is at 66KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of PARP2 using anti-PARP2 antibody (MBS1753585).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: rat testis tissue lysatesLane 2: human HEK293 whole cell lysatesLane 3: human HL-60 whole cell lysatesLane 4: human U20S whole cell lysatesLane 5: human HepG2 whole cell lysatesLane 6: human A431 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-PARP2 antigen affinity purified polyclonal antibody (Catalog # MBS1753585) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for PARP2 at approximately 66KD. The expected band size for PARP2 is at 66KD. )
Immunofluorescence (IF)
(Figure 2. IF analysis of PARP2 using anti-PARP2 antibody (MBS1753585).PARP2 was detected in immunocytochemical section of HEP cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti- PARP2 Antibody (MBS1753585) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Immunofluorescence (IF)
(Figure 2. IF analysis of PARP2 using anti-PARP2 antibody (MBS1753585).PARP2 was detected in immunocytochemical section of HEP cells. Enzyme antigen retrieval was performed using IHC enzyme antigen retrieval reagent (MBS176582) for 15 mins. The cells were blocked with 10% goat serum. And then incubated with 5μg/mL rabbit anti- PARP2 Antibody (MBS1753585) overnight at 4 degree C. DyLight®488 Conjugated Goat Anti-Rabbit IgG was used as secondary antibody at 1:100 dilution and incubated for 30 minutes at 37 degree C. The section was counterstained with DAPI. Visualize using a fluorescence microscope and filter sets appropriate for the label used. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of HL-60 cells using anti-PARP2 antibody (MBS1753585).Overlay histogram showing HL-60 cells stained with MBS1753585 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PARP2 Antibody (MBS1753585, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of HL-60 cells using anti-PARP2 antibody (MBS1753585).Overlay histogram showing HL-60 cells stained with MBS1753585 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PARP2 Antibody (MBS1753585, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Berghammer, H., Ebner, M., Marksteiner, R., Auer, B. pADPRT-2: a novel mammalian polymerizing(ADP-ribosyl)transferase gene related to truncated pADPRT homologues in plants and Caenorhabditis elegans. FEBS Lett. 449: 259-263, 1999.
3. Dantzer, F., Mark, M., Quenet, D., Scherthan, H., Huber, A., Liebe, B., Monaco, L., Chicheportiche, A., Sassone-Corsi, P., de Murcia, G., Menissier-de Murcia, J. Poly(ADP-ribose) polymerase-2 contributes to the fidelity of male meiosis I and spermiogenesis. Proc. Nat. Acad. Sci. 103: 14854-14859, 2006.
NCBI and Uniprot Product Information
NCBI Description
This gene encodes poly(ADP-ribosyl)transferase-like 2 protein, which contains a catalytic domain and is capable of catalyzing a poly(ADP-ribosyl)ation reaction. This protein has a catalytic domain which is homologous to that of poly (ADP-ribosyl) transferase, but lacks an N-terminal DNA binding domain which activates the C-terminal catalytic domain of poly (ADP-ribosyl) transferase. The basic residues within the N-terminal region of this protein may bear potential DNA-binding properties, and may be involved in the nuclear and/or nucleolar targeting of the protein. Two alternatively spliced transcript variants encoding distinct isoforms have been found. [provided by RefSeq, Jul 2008]
Uniprot Description
PARP2: Involved in the base excision repair (BER) pathway, by catalyzing the poly(ADP-ribosyl)ation of a limited number of acceptor proteins involved in chromatin architecture and in DNA metabolism. This modification follows DNA damages and appears as an obligatory step in a detection/signaling pathway leading to the reparation of DNA strand breaks. 2 isoforms of the human protein are produced by alternative splicing.
Protein type: DNA repair, damage; Transferase; EC 2.4.2.30
Chromosomal Location of Human Ortholog: 14q11.2
Cellular Component: nucleoplasm; nucleolus; nucleus
Molecular Function: protein binding; DNA binding; NAD+ ADP-ribosyltransferase activity
Biological Process: protein amino acid ADP-ribosylation; base-excision repair; DNA repair
Research Articles on PARP2
Similar Products
Product Notes
The PARP2 parp2 (Catalog #AAA1753585) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-PARP2 Antibody reacts with Human, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's PARP2 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunocytochemistry (ICC), Immunofluorescence (IF), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human, Rat| ICC/IF: 5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the PARP2 parp2 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "PARP2, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
