Western Blot (WB)
(Figure 1. Western blot analysis of PCBP1 using anti-PCBP1 antibody (MBS1753542).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEPG2 whole cell lysatesLane 3: mouse NIH/3T3 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-PCBP1 antigen affinity purified polyclonal antibody (Catalog # MBS1753542) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for PCBP1 at approximately 40KD. The expected band size for PCBP1 is at 40KD. )
Rabbit PCBP1 Polyclonal Antibody | anti-PCBP1 antibody
Anti-PCBP1 Antibody
IHC-P: 2-5ug/ml|Human|
FC/FACS/FCM: 1-3ug/1x106 cells|Human, Mouse, Rat|
Direct ELISA: 0.1-0.5ug/ml|Human|
Western Blot (WB)
(Figure 1. Western blot analysis of PCBP1 using anti-PCBP1 antibody (MBS1753542).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEPG2 whole cell lysatesLane 3: mouse NIH/3T3 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-PCBP1 antigen affinity purified polyclonal antibody (Catalog # MBS1753542) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for PCBP1 at approximately 40KD. The expected band size for PCBP1 is at 40KD. )
Western Blot (WB)
(Figure 1. Western blot analysis of PCBP1 using anti-PCBP1 antibody (MBS1753542).Electrophoresis was performed on a 5-20% SDS-PAGE gel at 70V (Stacking gel) / 90V (Resolving gel) for 2-3 hours. The sample well of each lane was loaded with 50ug of sample under reducing conditions.Lane 1: human HELA whole cell lysatesLane 2: human HEPG2 whole cell lysatesLane 3: mouse NIH/3T3 whole cell lysates.After Electrophoresis, proteins were transferred to a Nitrocellulose membrane at 150mA for 50-90 minutes. Blocked the membrane with 5% Non-fat Milk/ TBS for 1. 5 hour at RT. The membrane was incubated with rabbit anti-PCBP1 antigen affinity purified polyclonal antibody (Catalog # MBS1753542) at 0. 5 μg/mL overnight at 4 degree C, then washed with TBS-0. 1%Tween 3 times with 5 minutes each and probed with a goat anti-rabbit IgG-HRP secondary antibody at a dilution of 1:5000 for 1. 5 hour at RT. The signal is developed using an Enhanced Chemiluminescent detection (ECL) kit (Catalog # MBS176460) with Tanon 5200 system. A specific band was detected for PCBP1 at approximately 40KD. The expected band size for PCBP1 is at 40KD. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of CACO-2 cells using anti-PCBP1 antibody (MBS1753542).Overlay histogram showing CACO-2 cells stained with MBS1753542 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PCBP1 Antibody (MBS1753542, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 2. Flow Cytometry analysis of CACO-2 cells using anti-PCBP1 antibody (MBS1753542).Overlay histogram showing CACO-2 cells stained with MBS1753542 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PCBP1 Antibody (MBS1753542, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of RAW264. 7 cells using anti-PCBP1 antibody (MBS1753542).Overlay histogram showing RAW264. 7 cells stained with MBS1753542 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PCBP1 Antibody (MBS1753542, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 3. Flow Cytometry analysis of RAW264. 7 cells using anti-PCBP1 antibody (MBS1753542).Overlay histogram showing RAW264. 7 cells stained with MBS1753542 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PCBP1 Antibody (MBS1753542, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 4. Flow Cytometry analysis of RH35 cells using anti-PCBP1 antibody (MBS1753542).Overlay histogram showing RH35 cells stained with MBS1753542 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PCBP1 Antibody (MBS1753542, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
Flow Cytometry (FC/FACS)
(Figure 4. Flow Cytometry analysis of RH35 cells using anti-PCBP1 antibody (MBS1753542).Overlay histogram showing RH35 cells stained with MBS1753542 (Blue line). The cells were blocked with 10% normal goat serum. And then incubated with rabbit anti-PCBP1 Antibody (MBS1753542, 1μg/1x106 cells) for 30 min at 20 degree C. DyLight®488 conjugated goat anti-rabbit IgG (5-10μg/1x106 cells) was used as secondary antibody for 30 minutes at 20 degree C. Isotype control antibody (Green line) was rabbit IgG (1μg/1x106) used under the same conditions. Unlabelled sample (Red line) was also used as a control. )
2. Hahm, K., Kim, G., Turck, C. W., Smale, S. T. Isolation of a murine gene encoding a nucleic acid-binding protein with homology to hnRNP K. Nucleic Acids Res. 21: 3894 only, 1993.
3. Kosturko, L. D., Maggipinto, M. J., Korza, G., Lee, J. W., Carson, J. H., Barbarese, E. Heterogeneous nuclear ribonucleoprotein (hnRNP) E1 binds to hnRNP A2 and inhibits translation of A2 response element mRNAs. Molec. Biol. Cell 17: 3521-3533, 2006
NCBI and Uniprot Product Information
NCBI Description
This intronless gene is thought to have been generated by retrotransposition of a fully processed PCBP-2 mRNA. This gene and PCBP-2 have paralogues (PCBP3 and PCBP4) which are thought to have arisen as a result of duplication events of entire genes. The protein encoded by this gene appears to be multifunctional. It along with PCBP-2 and hnRNPK corresponds to the major cellular poly(rC)-binding protein. It contains three K-homologous (KH) domains which may be involved in RNA binding. This encoded protein together with PCBP-2 also functions as translational coactivators of poliovirus RNA via a sequence-specific interaction with stem-loop IV of the IRES and promote poliovirus RNA replication by binding to its 5'-terminal cloverleaf structure. It has also been implicated in translational control of the 15-lipoxygenase mRNA, human Papillomavirus type 16 L2 mRNA, and hepatitis A virus RNA. The encoded protein is also suggested to play a part in formation of a sequence-specific alpha-globin mRNP complex which is associated with alpha-globin mRNA stability. [provided by RefSeq, Jul 2008]
Uniprot Description
hnRNP E1: Single-stranded nucleic acid binding protein that binds preferentially to oligo dC. Abundantly expressed in skeletal muscle, thymus and peripheral blood leukocytes while a lower expression is observed in prostate, spleen, testis, ovary, small intestine, heart, liver, adrenal and thyroid glands.
Protein type: RNA splicing; Translation; RNA-binding
Chromosomal Location of Human Ortholog: 2p13-p12
Cellular Component: nucleoplasm; intracellular membrane-bound organelle; membrane; cytoplasm; ribonucleoprotein complex
Molecular Function: protein binding; RNA binding; single-stranded DNA binding
Biological Process: nuclear mRNA splicing, via spliceosome; RNA splicing; gene expression
Research Articles on PCBP1
Similar Products
Product Notes
The PCBP1 pcbp1 (Catalog #AAA1753542) is an Antibody produced from Rabbit and is intended for research purposes only. The product is available for immediate purchase. The Anti-PCBP1 Antibody reacts with Human, Mouse, Rat and may cross-react with other species as described in the data sheet. AAA Biotech's PCBP1 can be used in a range of immunoassay formats including, but not limited to, Western Blot (WB), Immunohistochemistry-Paraffin (IHC-P), Flow Cytometry (FC/FACS/FCM), Direct ELISA (EIA). WB: 0.25-0.5ug/ml|Human, Mouse| IHC-P: 2-5ug/ml|Human| FC/FACS/FCM: 1-3ug/1x106 cells|Human, Mouse, Rat| Direct ELISA: 0.1-0.5ug/ml|Human|. Researchers should empirically determine the suitability of the PCBP1 pcbp1 for an application not listed in the data sheet. Researchers commonly develop new applications and it is an integral, important part of the investigative research process. It is sometimes possible for the material contained within the vial of "PCBP1, Polyclonal Antibody" to become dispersed throughout the inside of the vial, particularly around the seal of said vial, during shipment and storage. We always suggest centrifuging these vials to consolidate all of the liquid away from the lid and to the bottom of the vial prior to opening. Please be advised that certain products may require dry ice for shipping and that, if this is the case, an additional dry ice fee may also be required.Precautions
All products in the AAA Biotech catalog are strictly for research-use only, and are absolutely not suitable for use in any sort of medical, therapeutic, prophylactic, in-vivo, or diagnostic capacity. By purchasing a product from AAA Biotech, you are explicitly certifying that said products will be properly tested and used in line with industry standard. AAA Biotech and its authorized distribution partners reserve the right to refuse to fulfill any order if we have any indication that a purchaser may be intending to use a product outside of our accepted criteria.Disclaimer
Though we do strive to guarantee the information represented in this datasheet, AAA Biotech cannot be held responsible for any oversights or imprecisions. AAA Biotech reserves the right to adjust any aspect of this datasheet at any time and without notice. It is the responsibility of the customer to inform AAA Biotech of any product performance issues observed or experienced within 30 days of receipt of said product. To see additional details on this or any of our other policies, please see our Terms & Conditions page.Item has been added to Shopping Cart
If you are ready to order, navigate to Shopping Cart and get ready to checkout.
